Aron AD2E01CNPF Valve

AD.2.E... DIRECTIONAL CONTROL SOLENOID OPERATED VALVES CETOP 2/NG4 Max. pressure ports P/A/B
Max pressure port T (dynamic) Max flow Max excitation frequency Duty cycle
Fluid viscosity Fluid temperature Ambient temperature Max contamination level
1
250 bar 250 bar 20 l/min 3 Hz 100% ED 10 ÷ 500 mm2/s -25°C ÷ 75°C -25°C ÷ 60°C
class 10 in accordance with
NAS 1638 with filter ß25≥75 0,88 Kg 1,1 Kg
Weight with one DC solenoid Weight with two DC solenoids
E = Manual override
Screws with material specifications min. 8.8 recommended - UNI 5931 Tightening torque of screws
M5x35 = 5 Nm / 0.5 Kgm.
Support plane specifications
DC COILS A09 Type of protection (in relation to connector used) Number of cycle
Supply tolerance Ambient temperature Duty cycle Insulation class wire Weight
AMP JUNIOR (AJ)
DEUTSCH COIL WITH BIDIR. DIODE (CX) DT04 - 2P
VOLTAGE MAX WINDING TEMPERATURE (V) (AMBIENT TEMPERATURE 25°C) 12V 123°C
24V 123°C 48V* 123°C 102V(*)(**) 123°C 110V(*)(**) 123°C 205V(*)(**) 123°C
* Special voltages
FLYING LEADS (FL)
LEADS WITH DIODO (LD)
IP 65 18.000/h ±10% -30°C ÷ 50°C 100% ED H 0,215 Kg
• The AMP Junior coil, the Deutsch coil with bidirectional diode and the coil with flying leads (with or
without diode) coils are available in 12V or 24V DC voltage only.
RATED RESISTANCE AT 20°C ** The european low voltage directive (OHM) ±7%
(W) is applied to electronical equipments 27 5.3 used at a nominal voltages between
50 and 1000 VAC or 75 and 1500 VDC.
27 21.3 In conformity with the low directive each 27 85.3 part of the manifold or the subplate
27 392 on which the valve is mounted should 27 448 be connected to a protective earth
27 1577 with a resistence less than 0.1 ohms.
POWER
EMERGENCY (COILS WITH HIRSCHMANN CONNECTION)
ROTARY WITHOUT CONNECTOR (P2*) (ES)
ROTAN ROTARY WITH CONNECTOR (P1*)
MANUAL WITH CONNECTOR (E1)
MANUAL WITHOUT CONNECTOR
(*) Emergency tightening torque max. 6÷9 Nm / 0.6 ÷ 0.9 Kgm with CH n. 22