The ACHK series is for intermediating pressure, multi-staged
centrifugal pump, and it is very useful to make cool and to wash
the processing materials.This pump is designed compact to install in a small space, and
applying to NC, CNC, lathe, machining center, grinding machine,
as a cooling system, industrial washing machine and filtering
systems.The major raw material is made stainless steel, and the
mechanical seal is FKM(Viton rubber) so it is very strong about
high temperature and endurance.The using liquids should be clean, non-explosive and low
viscosity without solid particles, sludge, and fibres, additionally
not affects original elements of pump.
If the viscosity and gravity of using liquids is higher than soluble
cutting water, the motor power has to be increased according to
working conditions.This pump can be installed additional empty chambers when
the tank is deeper.Caution: Because more chambers installing causes low pressure,
when the pump is equiped, the separating plate has to be
installed between tank outlet area and inlet area to avoid
low sucking performance.Motor:The motor is used standard fan cooling system and standard dimension.Enclosure class : IP54Insulation class : FStandard voltage 50Hz : 3Ø 200/380, 415VStandard voltage 60Hz : 3Ø 220/380, 440VThe motors manufactured at our company are high efficiency
motors, 750W or higher, according to the Efficiency Standard of
Minimum Consumption of Korea.Other non-standard voltage and premium motors may be
customized; however, electrical specifications and appearances
may be differed from the drawingWhen using a 3ph motor, a standard starting panel must be
connected to the 3ph motor.Max. Ambient temperature: Because of low cooling effects by low density of the air on condition
of ambient temperature above 40C or altitude over 1000m, the
output of motor should be lowered more below than standard
capacity.Example: When the pump should be installed sea level 3500m
and ambient temperature 60C, The performance ability
drops 80%.Sound Pressure Level