The Atlas Valve, Series 52334, provides an array of functionality in addition to standard height control valve capabilities. Patent pending, Atlas valves are able to provide one of four additional functions for air suspension applications.  With actuation of an additional pilot signal, operator can raise or lower the suspension to a predetermined secondary height.  Other functions of shutting off flow in and out of the valve or secondary flow rate, which can be higher or lower than standard, can be incorporated with an auxiliary air pilot signal as well.  The remaining features of dump, metered flow, and “no truck breakdown” failure mode have been built-in from the existing 52341 Dump Valve Series.  With Shear-Seal® technology, Atlas provides the same high performance and reliability as the 52341 Dump Valve Series, which is designed to take on the most adverse and demanding road conditions.

Operating Media Air Seal Type Shear-Seal® Operating Pressure 130 psi (9 bar) Maximum Operating Temperature -40ºF to +150ºF (-40ºC to +65ºC) Flow Curve Proportional response Maximum Flow Rate (@ 120 psi) Low flow: 120 L/Min (4.2 cfm) Standard flow: 325 L/Min (14.2 cfm) Port size Standard 1/4” NPT, PTC Delivery Ports (Bag Ports) Dual delivery ports Mounting Studs 1/4-20 UNC, M6 Maximum Handle Movement +/- 75º for fill or exhaust Dump Flow Rate 875 L/min (31 cfm) Port Activation Dump Auxiliary 70 psi (4.8 bar) minimum 70 psi (4.8 bar) minimum Port Configuration Dump Auxiliary Normally open or normally closed Normally open or normally closed Materials Of Construction Body: Anodized aluminum Housing: Engineered plastics Lever: Zinc plated steel Internal Elements: Stainless steel Seals: Buna-N Weight (typical) 1.6 lb (726g) 

Dual Ride Height Valve

Air Suspension Valve with Second Ride Height and Integral Dump

Height Control Valve with four modes: Raised Suspension/Lowered Suspension/Blocking Mode (Shut-Off)/Variable Air Flow (High/Low)

Applications

Truck

Tractor

Trailer

Bus and Coach

RV