Industrial spare parts & engineering solutions since 2001.
Bartec 07-2911-101130
Technical Datasheets / Product Documentations
| Brand |  |
| Category | Others |
| Product Name | Bartec 07-2911-101130 |
| Product Code | Unspecified |
Contact with us! 24 business hours (excluding weekends and holidays) to confirm stock status and estimated delivery time.
Product Description
Bartec products, including Bartec 07-2911-101130, are sourced through parallel import channels and delivered to our customers worldwide with speed and reliability. As an authorized trading partner, Imtek Engineering offers genuine Bartec parts at competitive prices. Even if Bartec 07-2911-101130 is not listed on our website, you are welcome to request a price quote — our team will respond promptly with a tailored offer.
Position switch Aluminium Explosion protection Marking Position switch type 07-2511
ATEX
Ex II 2G Ex db IIC T6, T5 Gb Ex II 2D Ex tb IIIC T80°C, T95°C Db
Certification
EPS 14 ATEX 1766 X
IECEx
Ex db IIC T6, T5 Gb Ex tb IIC T80°C, T95°C Db
Certification
IECEx EPS 14.0092 X
Other approvals and certificates, bartec.com
Operating temperature
-50 °C to +100 °C depending on the model and the materials used
Ambient temperature
T6 to max. +75 °C depending on the rated current
Technical data Electrical data according to
DIN EN 60947-5-1
Rated operating voltage AC 400 V Utilisation category AC-15 4A 250 V AC-15
2A 400 V DC-13 0.15 A 250 V Isolation voltage 400 V
Ambient temperature +40 °C
400 V 250 V 30 V
ohmic load 3A 5A 7A
inductive load cosφ = 0.6 2A 3A 5A
250 V 30 V
ohmic load 0.4 A 7A
inductive load L/R = 3μs 0.03 A 5A
AC switching capacity
– Dimensions and mounting dimensions according to DIN EN 50041
– Compatible with non-Ex DIN limit switches
DC switching capacity
– Different switching elements All dimensions and actuating elements of the Ex d position
switch correspond to the DIN EN 50041 standard. Its 30 x 60 mm mounting dimensions make the switch directly compatible
to the position switch corresponding to the same DIN standard.
The switch is equipped with snap-action contacts with several switching element versions. A microswitch with connection
cable Type 07-2511 is mounted as switching element. Different actuators are available for the variety of actuating possibilities.
After the removal of four screws these knobs can be rotated by 90 °C allowing four different directions of actuation. Goldplated contacts are available for the switching of low currents
of voltages. Standard length of the connection cables are 3 m.
BARTEC has designed a very extensive range of Ex e terminal boxes of polyester and aluminium for the connection of the
position switch within the Ex area.
BARTEC GmbH Max-Eyth-Str. 16 97980 Bad Mergentheim
Tel.: +49 7931 597 0 Fax: +49 7931 597 119
Further electrical data on request.
Switching elements
see table
Max. switching frequency
1000 h
Mechanical life
>2 x 106 switching cycles depending on plunger operating speed and angle
Electrical life
dependent on load
Electrical connection
Lead 0.75 mm2 HO5VV-F/A05VV-F/ BETAflam
Other cores and leads on request.
Enclosure material
Mail: [email protected] Web: bartec.com
aluminium
Frequently Asked Questions
Frequently asked questions about Bartec 07-2911-101130 by Bartec. Imtek Engineering is ready to assist you in sourcing Bartec 07-2911-101130 from Bartec in United States.
United StatesImtek Engineering sources genuine Bartec products through trusted supply channels and supplies them to customers in United States at competitive prices.
