REVO S 2PH is a three phases static relay suitable for driving loads with star connection without neutral or delta, on two phases. The unit has been designed to save space and work.Current range – 30A, 35A, 40A, 60A, 75A, 90A, 120A, 150A, 180A, 210A, 300A, 400A, 450A, 500A, 600A, 700A, 800AVoltage range 480V, 600V and 690V (starting from 60A), +/-10%Fully isolated from the powerZero crossing firing mode (ZC) or Burst Firing (4, 8 or 16 cycles selectable)Load type: Resistance, IR Lamp long and medium waveformLogic input signal 4 to 30Vdc typical (SSR) plus 4-20mA or 0-10Vdc Linear input as an optionConstant current drain, independent of supply voltage with SSR inputHeater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication. Available as an optionSide by side mountingSpecial design Heatsink with high dissipation valueIP20 protectionComplies with EMC, EAC, cULus® 508 Listed and cUL® listed up to 700A as an option. UL® listed for 800A as an option.