Barksdale Series B1S, B2S, B1T, B2T Stripped & Housed Bourdon Tube
Barksdale
Product Code: Series B1S, B2S, B1T, B2T
Brand: Barksdale
GET OFFER: info@imtek.com.tr
Description for Barksdale Series B1S, B2S, B1T, B2T Stripped & Housed Bourdon Tube
Barksdale's Bourdon Tube Pressure Switches offer instrument class accuracy, making them an ideal solution to your pressure control needs when accuracy is critical. Built-in over-travel stops allow for higher proof pressures than most other pressure switch technologies. Setpoints are easily adjusted via an internal adjustment screw. Available in single and dual configurations, Bourdon Tube Pressure Switches are adaptable for use in a wide range of industrial applications. A variety of limit switches is available to allow for a multitude of electrical switching conditions. For applications requiring a highly accurate switch in a highly durable package, Bourdon Tube Pressure Switches are the ideal solutionGeneral Specifications*Electrical Characteristics:All models incorporate Underwriters Laboratories, Inc. and CSA Listed single pole double throw snap-action switching elements.Accuracy:±1% of the adjustable rangeSwitch:Type:Rating:Single pole double throw (SPDT) snap action; single or dual circuit10 amp @ 125/250 VAC3 amp @ 480 VAC0.5 amp @ 24 VDCWetted Parts:Process Fitting & Bourdon Tube:Enclosure:316 series stainless steelAnodized aluminumElectrical Connection:Stripped Model:Housed Model:21" Free LeadsInternal terminal strip via conduit connectionEnclosure Ratings:Housed Model:NEMA 4Pressure Connection:Housed models with proof pressure up to 7,200 psi and stripped models with proof pressure up to 6,000 psi; 1/4" NPT female; All higher pressure ranges: superpressure fitting for 1/4" O.D. tube.Approvals:UL/CSA (optional):UL File E42816Class 3231 02; File No. 022355-0.000Temperature Range:Operating:-40° to +165°F (-40° to +74°C)Adjustment Instructions:Remove protective hex cap to remove adjustment screw.Turn main unit adjustment screw clockwise to lower setpoint, counterclockwise to raise setpoint.For optional adjustable actuation value (deadband) models, set the desired DECREASING setpoint first and then turn microswitch adjustment wheel counterclockwise to increase the amount of deadband until the desired INCREASING setpoint is achieved.Options:-UL/CSA approval (max rating 300 VAC)-NEMA 4X-Temperature stabilization and pre-cycle-Cleaned for oxygen serviceShipping Weight:Stripped Model:Housed Model:1.5 lbs. approximate2.5 lbs. approximate* See product confi gurator for additional options.Wiring CodeLeadCircuit #1Circuit #2Normally ClosedBlueOrangeCommonPurpleBrownNormally OpenRedYellowRecommended Products For Barksdale