CD Automation REVO HMI Graphic Interface for Modular Control

CD Automation

Product Code: REVO HMI
Brand: CD Automation



GET OFFER: info@imtek.com.tr

Description for CD Automation REVO HMI Graphic Interface for Modular Control

CONTROL PARAMETERSProportional BandIntegral TimeDerivative TimeCooling gainOLAPPre Tune ActivationSelf Tune Activation Operating PageEach project can manage up to 30 loops.The operatore Page can display 4 or 8 loops depending by the HMI and by the setup of the project.Pushing the zone description area is possible to see the advanced parameter and setting page for each zone.Four and Eight Loop Page DisplayZone description (editable by user)ON/OFF Push ButtonSetpoint display and settingTemperature measured displayPower Output ValueGeneric Alarm StatusDeviation GraphTrend Display Push Button for each zoneAdvanced Operating PageFor each loop is available an advanced page with the following parameters and alarm.The parameters with light blue colour can be setted on this page.This page can be displayed touching the zone name on the main operating page. Touching the arrow keys, is possible to move to the next zone or to move on the previous zone.SETPOINT and MEASURE– Setpoint– Measure– % Heat and % CoolALARM STATUS– Alarm 1 Deviation (default)– Alarm 2 Max Temperature (default)– Alarm 3 not configured (default)HEATER BREAK ALARM– HB Alarm Status– Short Circuit Alarm Status– Alarm threshold– Current Value Setting

Recommended Products For CD Automation