Produktname: Dynisco 1392-1-3 Temperature Indicator
Marke: Dynisco
Produktcode: 1392-1-3 Temperature Indicator
Stichwörter: Dynisco
Temperature
Indicator
Dynisco Temperature
Temperature Indicator
1392-1-3 Indicator
Dynisco Indicator
1392-1-3
Dynisco 1392-1-3
1392-1-3 Temperature
Dynisco 1392-1-3 Temperature
1392-1-3 Temperature Indicator
Dynisco 1392-1-3 Temperature Indicator
Dynisco Temperature Indicator
Dynisco 1392-1-3 Indicator
Interessieren Sie sich für das Produkt Dynisco 1392-1-3 Temperature Indicator vom Hersteller Dynisco mit dem Code 1392-1-3 Temperature Indicator? Kontaktieren Sie uns jetzt und holen Sie sich ein Angebot. Imtek Engineering, der schnellste und zuverlässigste Lieferant von Industrieausrüstung der Welt, wird Ihnen das beste Angebot machen!
Angebot per E-Mail erhalten: info@im-tek.com
Holen Sie sich jetzt ein Angebot für Dynisco 1392-1-3 Temperature Indicator von unserem Live-Support-Team!
· 350 ohm strain gage input · Pushbutton programming and calibration · Configwareâ„¢ SW configurable · Scalable, voltage or current outputs · MODbus communication option · Peak and valley detection · Transducer interrupt detection · UL, cUL recognized · CE approved Specifications Performance Characteristics Instrument type: Digital panel meter Display: 5 red LED digits 0.5" (12.7mm) high 2 red LED lights for alarm 1 green LED light for remote configuration Accuracy: ±0.1% Normal Mode Rejection Ratio: 60dB at 50/60Hz Sampling Time: 100mS Input Thermocouple: Types J, K, E, L, N, R, S, T RTD: Type PT100 (DIN 43760) Linear Input: 0(4)-20mA and 0(1)-5Vdc and 0(2)-10Vdc Scaling: ?F or ?C programmable Alarm Outputs (2) Alarm Type: Two SPST Form C Contact Rating: 0.6A @110Vdc, resistive load 0.5A @220Vdc, resistive load 0.3A @110Vdc, inductive load Alarm Update Time: 100mS Analog Retransmission Outputs Type: 0(4)-20mA, 0(1)-5V or 0(2)-10V. 500?, max load Resolution: ±0.05% of output span maximum Accuracy: ±0.2% of span Update Time: 100mS Serial Communication Interface Type: Isolated RS-485 Protocol: ModBus/JBus selectable (half duplex) Baud Rate: 150 – 19200 baud Format: 8 bits + parity; 8 bits without parity Parity: Odd / Even Mechanical & Packaging Characteristics Termination: Screw terminals on rear with safety covers Front Panel: IP65/NEMA4-rated with gasket Operating Temperatures: 32? – 130?F (0? – 55?C) Humidity: 5 – 85% relative humidity, non-condensing Vibration: 10 – 150Hz at a peak of 1G Approvals & Certifications CE Mark: EMC standard EN 61326-1 2002 Safety standard EN 61010-1 2001 Agency approvals: UL: According to UL 3121-1 cUL: According to C22.2 No. 142 C-Tick: Australia Power Supply (Mains) Input Power: 85-264 Vac (24V ac/dc available) Power Consumption: 10W, max Input Protection: Internal thermistor Isolation: Reinforced isolation from instrument and all other I/O circuits