Produktname: Hydropa DS117-150/F Pressure Switch
Marke: Hydropa
Produktcode: Hydropa DS117-150/F
Stichwörter: Hydropa
DS117-150/F Pressure
Hydropa DS117-150/F Switch
Hydropa DS117-150/F
DS117-150/F Pressure Switch
Pressure Switch
DS117-150/F Switch
DS117-150/F
Pressure
Switch
Hydropa DS117-150/F Pressure
Hydropa Pressure
Hydropa DS117-150/F Pressure Switch
Hydropa Switch
Hydropa Pressure Switch
Artikel: DS117-150/F
Hydropa DS117-150/F
Interessieren Sie sich für das Produkt Hydropa DS117-150/F Pressure Switch vom Hersteller Hydropa mit dem Code Hydropa DS117-150/F? Kontaktieren Sie uns jetzt und holen Sie sich ein Angebot. Imtek Engineering, der schnellste und zuverlässigste Lieferant von Industrieausrüstung der Welt, wird Ihnen das beste Angebot machen!
Angebot per E-Mail erhalten: info@im-tek.com
Holen Sie sich jetzt ein Angebot für Hydropa DS117-150/F Pressure Switch von unserem Live-Support-Team!
TECHNICAL SPECIFICATIONSø 4 mm ø 5 mmSwitching pressure ranges 20-350 bar 20-240 bar 10-150 bar 5-70 barRepeatability deviation less than 1% (depending on the area of ??application)Ambient temperature - 40 ° C to + 90 ° CHydraulic fluid oil, oil-water emulsionSwitching elementelectromechanical switch CEE 24; VDE 0630, T85 UL 1054 / CSA C22.2 No. 55 6 TSD, T90Type of voltage AC voltage / DC voltageDegree of protection DIN 60529 IP 65Power connection cable socket according to EN 175301-803, type A, Pg9 (Pg11 on request)Housing unpainted aluminumPressure connection aluminumSwitching path approx. 0.5 mm - therefore very little wear on the seal and tappet guideConnection plates for valve manifold NG 6 and NG 10 (only for flangeable pressure switches)Piston diameterProfile contact made of pure silver, on request profile contact gold coated on silver palladiumType piston spring-loaded, a mechanical stop prevents the spring from turning on-blockConnection thread G ¼ inside or flange surfaceAdjustment screw cap or knurl adjustmentAdjustment lock fixing coverAny installation positionGeneralHydraulicElectricalOther InformationWeight basic type 0.27 kgP max. (Standard seal) 500 bar 500 bar 400 bar 200 barP max. (SS seal1)) 400 bar 400 bar - bar - barViscosity range 10 to 800 mm² / sLoad changes ?5x1061) Low-friction special sealConductor cross section 0.5 mm² to 1.5 mm²Cable diameter 6 mm to 8 mm for Pg9 / 8 mm to 10 mm for Pg11Sealing outer jacket sealingVoltage 250 V / ACMax. 5 A loadSwitching capacityMax. Inductive load 1 A24 V / DC5 A4 ALIFESPANThe lifespan of a piston pressure switch depends on many factors. Minimum and maximum pressures,Cycle speed, load changes, hydraulic vibrations, the load (amp.) On the electrical switch, etc.If there are special requirements for the pressure switch, we can use many years of experienceMaterial pairings, processing methods and manufacturing tolerances targeted and flexible to the most variedMeet requirements.