Mts Sensor FMH Position Sensor

Input

Measured value Position

Stroke range 500…5000 mm (in 20 mm steps)

Output

Signal characteristic Analog output restricted by noise or A/D converter of control unit

Voltage 0.25…4.75 VDC / 0.5…4.5 VDC

Current 4…20 mA

Resolution ±0.2 mm

Sample rate 2 ms

Accuracy

Linearity ±0.04 % (F.S.)

Repeatability ±0.005 % (F.S.)

Hysteresis ±0.2 mm

Operating conditions

Mounting position Any

Operating temperature ?40…+105 °C

Humidity 90 % rel. humidity, no condensation

Ingress protection IP67 / IP69K with appropriate mating connection

Pressure

Nominal operating pressure (Pn) 350 bar

Max. overload pressure in cylinder (Pmax) 450 bar

Max. static proof pressure in cylinder (Pproof) 625 bar

Environmental testing

Shock test IEC 60068-2-27, 100 g (6 ms) single shock, 50 g (11 ms) at 1000 shocks per axis

Vibration test IEC 60068-2-64, 2 g (5…2000 Hz)

EMC test & evaluation ISO16750-2:2010

ISO 14982:2009 - Agricultural and forestry machinery

ISO 13766:2006 - Earth-moving machinery

EN 13309:2010 - Construction machinery

RF immunity to 200 V/m per ISO 11452-2/-4

Materials and dimensions

Sensor rod with flange Stainless steel 1.4306 (AISI 304L)

Sensor electronics housing Stainless steel 1.4305 (AISI 303)

Electrical installation

Connector M12 male plug

Supply voltage 12 VDC (tolerance range 8…32 VDC) 24 VDC (tolerance range 8…32 VDC)

Current consumption Typ. < 100 mA Typ. < 50 mA

Load (output VDC) RL> 10 k? RL> 10 k?

Load current (output VDC) Typ. 1 mA Typ. 1 mA

Loud (output mA) RL < 250 ? RL < 500 ?

Inrush current Max. 2.5 A/2 ms Max. 4.5 A/2 ms

Supply voltage ripple < 1 % PP

Power drain < 1 W

Over voltage protection (GND-VDC) Up to +36 VDC

Polarity protection (GND-VDC) Up to ?36 VDC

Insulation Resistance R ? 10 M? @ 60 sec

Electric strength 500 VDC (DC GND to chassis GND