Produktname: Mts Sensor MH SIL2 Mobile Hydraulic Position Sensor
Marke: Mts Sensor
Produktcode: MH SIL2
Stichwörter: Mts Sensor
Mts Sensor MH SIL2 Sensor
Sensor Hydraulic Position Sensor
MH SIL2 Hydraulic Sensor
Mts Sensor SIL2 Mobile Position
Sensor MH SIL2 Position
Mts Sensor MH SIL2 Hydraulic Sensor
Mts MH SIL2 Hydraulic Sensor
Sensor MH Mobile Hydraulic Position
Sensor Mobile Hydraulic Position Sensor
Sensor SIL2 Position
Mts Sensor SIL2 Position
MH Mobile Sensor
Mts MH SIL2 Mobile
Mts Sensor Mobile Sensor
Mts MH Sensor
Mts Mobile Hydraulic Sensor
Mts SIL2 Position
Mts Mobile Sensor
Mts Sensor Mobile Position
Mts SIL2
Mobile Hydraulic Position Sensor
Interessieren Sie sich für das Produkt Mts Sensor MH SIL2 Mobile Hydraulic Position Sensor vom Hersteller Mts Sensor mit dem Code MH SIL2? Kontaktieren Sie uns jetzt und holen Sie sich ein Angebot. Imtek Engineering, der schnellste und zuverlässigste Lieferant von Industrieausrüstung der Welt, wird Ihnen das beste Angebot machen!
Angebot per E-Mail erhalten: info@im-tek.com
Holen Sie sich jetzt ein Angebot für Mts Sensor MH SIL2 Mobile Hydraulic Position Sensor von unserem Live-Support-Team!
OutputSignal characteristic Continuously analog output restricted by noise or A/D converter of control unitVoltage 0.5…4.5 VDC with failure signal < 0.5 VDC LO > 4.5 VDC HICurrent 4…20 mA with failure signal < 4.0 mA LO > 20 mA HIMeasured value PositionMeasurement parametersResolution Typ. 0.1 mmPower uptime Typ. 250 msLinearity 0050…0250 mm 0255…2000 mm 2005…2500 mm? ±0.1 mm ±0.04 % (F.S.) ? ±0.8 mmHysteresis ±0.1 mmInternal sample rate 1 msSetpoint tolerance ? 1 mmOperating conditionsOperating temperature electronics ?40…+100 °CStorage temperature ?20…+65 °CFluid temperature ?30…+85 °CHumidity EN 60068-2-30, 90 % rel. humidity, no condensationIngress protection – M12 connector EN 60529 – IP69K (correctly fitted)Ingress protection – Sensor housing EN 60529 – IP67Shock test IEC 60068-2-27, 100 g (6 ms) single shock, 50 g (11 ms) at 1000 shocks per axisVibration test IEC 60068-2-64, 20 g (r.m.s.) Ø 10 mm pressure pipe (10…2000 Hz) – resonance frequencies excludedEMC test UNECE Regulation 10 Rev 5: Electromagnetic CompatibilityISO 14982 Agricultural and forest machinesEN 13309 Construction machinesImmunity: ISO 11452-2 (200 V/m Antenna), ISO 11452-4 (200 mA BCI)Emissions: CISPR 25Transiente Impulses: ISO 7637-1/2E.S.D.: ISO/TR 10605The sensor meets the requirements of the EC directives and is marked withPressure (according to DIN EN ISO 19879)* Ø 10 mm pressure pipePN (nominal operating) 350 barPmax (max. overload) 450 barPstatic (proof pressure) 625 barDesign / MaterialSensor electronics housing Stainless steel 1.4305 (AISI 303)Sealing O-ring 40.87 × 3.53 mm NBR 80, back-up ring 42.6 × 48 × 1.4 PTFESensor rod Stainless steel 1.4306 (AISI 304L)M12 connector insert Material: polyamide reinforces; O-ring 7 × 1.35 mm NBR 70; pins: brass with gold plated pinsM12 flange Brass nickel-plated with O-ring 13 × 1.6 NBR 70Stroke length 50…2500 mmMechanical mountingMounting position AnyMounting instruction Please consult the technical drawingsElectrical installationConnector M12 male connectorSupply voltage 12 VDC (8…32 VDC) 24 VDC (16…32 VDC)Current consumption Typ. < 100 mA Typ. < 50 mALoad (output VDC) RL > 10 k? RL > 10 k?Load current (output VDC) Typ. 0.5 mA Typ. 0.5 mALoad (output mA) RL < 250 ? RL < 500 ?Inrush current Max. 2.5 A/2 ms Max. 4.5 A / 2 msSupply voltage ripple < 1 % PPPower drain < 1 WOver voltage protection (GND - VDC) Up to +36 VDCPolarity protection (GND - VDC) Up to ?36 VDCInsulation Resistance R ? 10 M? @ 60 secElectric strength 500 VDC (DC GND to chassis GND)*/ According to calculations under use of the FKM guidelineCycles Ø 10 mm sensor rodDynamic pressure: < 2 × 106 pressure cycles 350 barStatic pressure: < 2 × 104 pressure cycles 450 barProof pressure: Maximum 5 minutes testing time for cylinder pressure test 625 bar