EKF S80-P6 Low Profile Mezzanine for Compact PCI Serial CPU Cards

EKF

Product Code: EKF S80-P6 Low Profile Mezzanine for Compact PCI Serial CPU Cards
Artikelnummer: S80-P6
Brand: EKF



GET OFFER: info@imtek.com.tr

Description for EKF S80-P6 Low Profile Mezzanine for Compact PCI Serial CPU Cards

Form FactorProprietary size mezzanine moduleFits basically into the 4HP (20.3mm) envelope of the CPU carrier boardTypically delivered as a ready to use assembly unit (including SC4-CONCERTO or successor CPU card)Mounting position right (on top of a CPU board)Host I/F Connectors HSE1/HSE2High speed mezzanine connectorsSuitable for PCI Express® Gen3Bottom mount male connectors HSE1 and HSE2 (high speed expansion)Mating with the carrier card female connectors HSE1/2Board-to-board height 10.8mm for a 4HP assemblyHSE1PCI Express® x4 support (dedicated to the NVMe SSD module M.2 socketPower sourcing 12V/1.5 A maximum continuous current (2 pins)HSE2PCI Express® support (dedicated to the PCIe x1 based on-board Gigabit Ethernet controller)Power sourcing 12V/3.0 A maximum continuous current (4 pins)M.2 NVMe Module ConnectorSingle M.2 socket, maximum M.2 size 2280 (M.2 formerly known as NGFF)Suitable for M.2 NVMe SSD module, key Id M, PCIe x4 I/FPCIe® 1x4 sourced via HSE1 mezzanine connectorMaximum (theoretical) 32Gbps I/O data transfer rate (Gen3 PCIe 8GT/s)Power switch, undervoltage lockout, short-circuit protection, quick dischargeGigabit Ethernet SwitchMarvell® 88E6390 based Gigabit Ethernet switch (in use 8 x GbE MAC/PHY 1000BASE-T, 1 x GbE MAC SerDes)Eight GbE ports wired to the backplane connector P6 (isolated by magmods)High performance, non-blocking, Gigabit EthernetSupport for up to 16K MAC addresses, 10KByte Jumbo FramesSupports 802.1 Audio Video Bridging (AVB) Gen 2Time Sensitive Networking (TSN) Standards, IEEE 1588v2 one-step PTPSynchronous EthernetQuality of Service (QoS) support with 8 traffic classesSupports 4096 802.1Q VLANs, three levels of 802.1Q securityUnmanaged or managed solutionIntegrated microprocessor (IMP) enables enhanced managed switch designs (customer programming)IMP GUI debugger w. ANSI C compiler & assembler available on request from Marvell®Remote (in-band) management available on request via Marvell® SOHO Switch GUI SoftwareConfigurable in-band management through SerDes switch port (connected to the optional on-board NIC), or GbE PHY switch port via P6 backplane Ethernet (1_ETH)Gigabit Ethernet ControllerIntel® I210-IS Gigabit Ethernet controller internally wired to the GbE switch port 9 via SerDes9.5KB Jumbo Frame supportHardware-based time stamping (IEEE 1588) and support for 802.1ASIEEE 802.1Qav compliant Audio-Video Bridging (AVB)IPv4, IPv6, TCP/UDP checksum offloadsBased on PCI Expess® x1 derived from the mezzanine connector HSE2Driver support for all major operating systemsApplicationsLow profile mezzanine module for EKF CPU Cards (SC4-CONCERTO and later)4HP assembly CPU carrier board and S80-P6 mezzanine cardAdds SSD mass storage and backplane Ethernet networking to the CPU carrierM.2 based mass storage, 1 x M.2 PCIe x4 socket (NVMe)On-board GbE switch for backplane communication and multiprocessing via backplane connector P6, eight GbE ports (suitable for single star architecture or full mesh or RIO)Environmental & RegulatoryDesigned & manufactured in GermanyISO 9001 certified quality managementLong term availabilityRugged solutionCoating, sealing, underfilling on requestLifetime application supportRoHS compliantOperating temperature 0°C to +70°COperating temperature -40°C to +85°C (industrial temperature range) on requestStorage temperature -40°C to +85°C, max. gradient 5°C/minHumidity 5% ... 95% RH non condensingAltitude -300m ... +3000mShock 15g 0.33ms, 6g 6msVibration 1g 5-2000HzMTBF 50.3 yearsEC Regulatory EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)

Recommended Products For EKF