EKF SC4-CONCERTO CompactPCI Serial CPU Card Intel Mobile Workstation Processor Xeon E3 v5 Family 6th Generation Intel Core Processor

GeneralCompactPCI® Serial (PICMG® CPCI-S.0) CPU cardForm factor single size Eurocard (board dimensions 100x160mm2)Mounting height 3UFront panel width 4HP (8HP/12HP assembly with optional mezzanine side card)Front panel I/O connectors for typical system configuration (2 x USB3, 2 x DisplayPort, 2 x GbE)Backplane communication via PCI Express® Gen3, SATA 6G, USB 3.0, Gigabit EthernetLocal mezzanine expansion option, COTS and custom specific boardsProcessorIntel® Skylake-H mobile platform with ECC (CM238 mobile workstation PCH)Intel® Xeon® processor E3 v5 family (mobile workstation)Xeon E3 1505M v5 • 2.8/3.7GHz • 8M • 4C/8T • DDR4 2133 ECC • 45/35W • GT2 • vPRO™Xeon E3 1505L v5 • 2.0/2.8GHz • 8M • 4C/8T • DDR4 2133 ECC • 25W • GT2 • vPRO™6th Generation Intel® Core™ mobile processori3 6100E • 2.7GHz • 3M • 2C/4T • DDR4 2133 ECC • 35W • GT2i3 6102E • 1.9GHz • 3M • 2C/4T • DDR4 2133 ECC • 25W • GT2G3900E • tbd GHz • 2M • 2C/2T • DDR4 2133 ECC • 35W • GT1G3902E • tbd GHz • 2M • 2C/2T • DDR4 2133 ECC • 25W • GT1FirmwarePhoenix® UEFI (Unified Extensible Firmware Interface) with CSM*Fully customizable by EKFSecure Boot and Measured Boot supported - meeting all demands as specified by Microsoft®Windows®, Linux and other (RT)OS' supportedIntel® AMT supported for Intel® Xeon® E3 v5 (disabled by default, must be enabled via BIOS setup)* CSM (Compatibility Support Module) emulates a legacy BIOS environment, which allows to boot a legacy operating system such as DOS, 32-bit Windows and some RTOS' Main MemoryIntegrated memory controller up to 32GB DDR4 2133 ECC +ECCDDR4 +ECC soldered memory up to 16GBDDR4 +ECC SO-DIMM memory module socket up to 16GBPerformance RatingtbdGraphicsIntegrated HD Graphics Engine, 3 symmetric independent displays3D HW acceleration DirectX12, OpenCL 2.x, OpenGL 4.3/4.4, ES 2.0HW video decode/encode HEVC, VP9, JPEGContent protectionFront panel options: Dual DisplayPort (DP) connectors3rd DisplayPort optional via Type-C connector on low profile mezzanine cardMax resolution 4096 x 2304 @60Hz (any DisplayPort, concurrent operation)DisplayPort™ 1.2 Multi-Stream Transport (MST) - display daisy chainingMST max resolution via single DP connector 2880x1800@60Hz (2 displays), 2304x1440@60Hz (3 displays)Integrated audio (3 independent audio streams)NetworkingUp to 10 networking interfaces in total - 2 x front RJ45 GbE, option 8 x backplane or 4 x M12-X front1000BASE-T, 100BASE-TX, 10BASE-T connectionsFront port 1 - I219LM with Intel® AMT supportFront port 2 - Intel® I210-IT -40°C to +85°C operating temperature GbE NIC w. integrated PHYIPv4/IPv6 checksum offload, 9.5KB Jumbo Frame support, EEE Energy Efficient EthernetIEEE 802.1Qav Audio-Video-Bridging (AVB) enhancements for time-sensivitive streamsIEEE 1588 and 802.1AS packets hardware-based time stamping for high-precision time synchronizationBackplane Gigabit Ethernet option w. S80-P6 mezzanine module - I210-IT NIC & Marvell Peridot switchOption front panel M12 X-coded GbE ports with SCL-RHYTHM side card (8HP front panel width)ChipsetIntel® CM238 Mobile Workstation Platform Controller Hub (PCH)PCIe Gen3 8GT/sSATA 6GUSB3GbELPC, Audio, LegacyOn-Board Building BlocksAdditional on-board devices, PCIe® based1 x Gigabit Ethernet controller Intel® I210IT1 x Gigabit Ethernet PHY Intel® I219LMIEEE 1588-2008 Precision Time Protocol supported including PPS and PPM signalsSATA 6G RAID controller Marvell® 88SE9230 ARM powered subsystem for host CPU offloadSecurityTrusted Platform ModuleTPM 2.0 for highest level of certified platform protectionInfineon Optiga™ SLB 9665 cryptographic processorConforming to TCG 2.0 specificationAES hardware acceleration support (Intel® AES-NI)Front Panel I/O (4HP)2 x Gigabit Ethernet RJ45 (1 = PCH & I219LM - Intel® AMT, 2 = I210IT)2 x DisplayPort (from processor integrated HD graphics engine, standard latching DP receptacles2 x USB 3.0Option 2 x Type-C USB 3.1 Gen1 (requires low profile mezzanine expansion card w. front panel I/O)Support for Type-C locking plugs (dual screw) according to the 'Locking Connector Spec. Rev. 1.0'Option DisplayPort Alt Mode on lower Type-C connector (3rd video monitor output)CompactPCI® Serial Backplane ResourcesPICMG® CPCI-S.0 CPU card & system slot controller16 x PCIe Gen3 8GT/s (2 links x 8 for two fat pipe slots, derived directly from the Intel® Xeon® or Core™ CPU6 x PCIe Gen3 8GT/s (6 links x 1 for peripheral slots)2 x SATA 6G (from CM238 PCH)4 x SATA 6G (Marvell hardware RAID controller)5 x USB2, 3 x USB3 (from CM238 PCH)Option 8 x Gigabit Ethernet (Marvell 88E6390 GbE switch, requires low profile mezzanine expansion card)Local ExpansionMezzanine side card connectors for local expansionLow profile mezzanine modules available (4HP front panel) and also side cards (8HP F/P assembly)P-EXP - Legacy (from PCH)P-HSE1 - configurable as 4 x SATA 6G or 4 x PCIe (from CM238 PCH), 1 x USB3P-HSE2 - 4 x PCIe (from CM238 PCH) & 3rd DisplayPort (from CPU)4HP Low profile mezzanine module preferred options:C47-MSATA Mezzanine module - 2 x mSATA SSD socketsC48-M2 Mezzanine module - 2 x M.2 2280 SATA SSD socketsS20-NVME Mezzanine module - 1 x M.2 2280 NVMe SSD socket, 1 x Type-C USB F/P connectorS40-NVME Mezzanine module - 1 x M.2 2280 NVMe SSD socket, 1 x M.2 2280 SATA SSD socket, 2 x Type-C USB F/P Connector (1 connector enabled for DisplayPort alternate mode)S80-P6 Mezzanine module - 1 x M.2 2280 NVMe SSD socket, 8 x Gigabit Ethernet via P6 backplane connector (TSN/AVB switch based solution)Custom specific storage & I/O mezzanine module design8HP/12HP Mezzanine side card optionsSCL-RHYTHM Quad port GbE NIC, front panel M12 X-coded receptacles, dual M.2 (NVMe/SATA) SSDSCZ-NVM Dual M.2 NVMe SSD, quad UARTCustom specific side card design - I/O and storageEnvironmental & RegulatorySuitable e.g. for industrial, transportation & instrumentation applicationsDesigned & manufactured in GermanyISO 9001 certified quality managementLong term availabilityRugged solutionCoating, sealing, underfilling on requestLifetime application supportRoHS compliantOperating temperature 0°C to +70°COperating temperature -40°C to +85°C (industrial temperature range) on requestStorage temperature -40°C to +85°C, max. gradient 5°C/minHumidity 5% ... 95% RH non condensingAltitude -300m ... +3000mShock 15g 0.33ms, 6g 6msVibration 1g 5-2000HzMTBF 11.9 yearsEC Regulatory EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)RT OS Board Support Packages & DriverLynxOS - on requestOn Time RTOS-32 - on requestOS-9 - on requestQNXReal-Time Linux (RT Patch) - on requestRTX - on requestVxWorks 5.5 & 6.9 - on requestVxWorks 7.0 - on requestOthers - on requestWhile mechanically compliant to CompactPCI® Classic, CompactPCI® Serial (PICMG® CPCIS.0) defines a completely new card slot, based on PCI Express®, SATA, Gigabit Ethernet and USB serial data lines. Up to 6 high-speed backplane connectors P1 - P6 are provided on a system slot controller such as the SC4-CONCERTO, which can be considered as a root hub with respect to most signal lines. A passive backplane is used for distribution of a defined subset of I/O channels from the system slot to each of up to eight peripheral slots in a CompactPCI® Serial system.Most CompactPCI® Serial peripheral slot cards require only the backplane connector P1, which comprises PCIe, SATA and USB signals, resulting in a concise and inexpensive peripheral board design. More powerful peripheral cards profit from so called Fat Pipe slots (PCIe x 8). The SC4-CONCERTO is a native CompactPCI® Serial CPU card, suitable for usage in a pure CPCI Serial environment. Due to its generous backplane capabilities (22 x PCI Express® Gen3, 8 x USB, 6 x SATA RAID, 8 x GbE), very powerful industrial systems can be built.SC4-CONCERTO • Simplified Block Diagram