EKF SC5-FESTIVAL Intel Xeon E3 v6 Mobile Processor

EKF

Product Code: EKF SC5-FESTIVAL Intel Xeon E3 v6 Mobile Processor
Artikelnummer: SC5-FESTIVAL
Brand: EKF



GET OFFER: info@imtek.com.tr

Description for EKF SC5-FESTIVAL Intel Xeon E3 v6 Mobile Processor

GeneralCompactPCI® Serial (PICMG® CPCI-S.0) CPU cardForm factor single size Eurocard (board dimensions 100x160mm2)Mounting height 3UFront panel width 4HP (8HP/12HP assembly with optional mezzanine side card)Front panel I/O connectors for typical system configuration (2 x USB3, 2 x DisplayPort, 2 x GbE)Backplane communication via PCI Express® Gen3, SATA 6G, USB 3.0, Gigabit EthernetLocal mezzanine expansion option, COTS and custom specific boardsProcessorIntel® Kaby Lake-H mobile platform with ECC (CM238 mobile workstation PCH)Intel® Xeon® processor E3 v6 family (mobile workstation)Xeon E3 1505M v6 • 3/4GHz • 8M • 4C/8T • DDR4 2400 ECC • 45/35W • GT2 - P630 • vPRO™Xeon E3 1505L v6 • 2.2/3GHz • 8M • 4C/8T • DDR4 2400 ECC • 25W • GT2 - P630 • vPRO™Xeon E3 1501M v6 • 2.9/3.6GHz • 6M • 4C/8T • DDR4 2400 ECC • 45/35W • GT2 - P630 • vPRO™Xeon E3 1501L v6 • 2.1/2.9GHz • 6M • 4C/8T • DDR4 2400 ECC • 25W • GT2 - P630 • vPRO™7th Generation Intel® Core™ mobile processori3 7100E • 2.9GHz • 3M • 2C/4T • DDR4 2400 ECC • 35W • GT2 - 630i3 7102E • 2.1GHz • 3M • 2C/4T • DDR4 2400 ECC • 25W • GT2 - 630FirmwarePhoenix® UEFI (Unified Extensible Firmware Interface) with CSM*Fully customizable by EKFSecure Boot and Measured Boot supported - meeting all demands as specified by Microsoft®Windows®, Linux and other (RT)OS' supportedIntel® AMT supported for Intel® Xeon® E3 v6 (disabled by default, must be enabled via BIOS setup)* CSM (Compatibility Support Module) emulates a legacy BIOS environment, which allows to boot a legacy operating system such as DOS, 32-bit Windows and some RTOS' Main MemoryIntegrated memory controller up to 32GB DDR4 2400 ECC +ECCDDR4 +ECC soldered memory up to 16GBDDR4 +ECC SO-DIMM memory module socket up to 16GBGraphicsIntegrated HD Graphics Engine, 3 symmetric independent displays3D HW acceleration DirectX12, OpenCL 2.x, OpenGL 4.3/4.4, ES 2.0HW video decode/encode HEVC10b 10-bit, VP9 10-bit, JPEGHDR (High Dynamic Range) Rec. 2020 Wide Color GamutContent protectionUHD premium content playbackFront panel options: Dual DisplayPort (DP) connectors3rd DisplayPort optional via Type-C connector on low profile mezzanine cardMax resolution 4096 x 2304 @60Hz (any DisplayPort, concurrent operation)DisplayPort™ 1.2 Multi-Stream Transport (MST) - display daisy chainingMST max resolution via single DP connector 2880x1800@60Hz (2 displays), 2304x1440@60Hz (3 displays)Integrated audio (3 independent audio streams)NetworkingUp to 10 networking interfaces in total - 2 x front RJ45 GbE, option 8 x backplane or 4 x M12-X front1000BASE-T, 100BASE-TX, 10BASE-T connectionsFront port 1 - I219LM with Intel® AMT supportFront port 2 - Intel® I210-IT -40°C to +85°C operating temperature GbE NIC w. integrated PHYIPv4/IPv6 checksum offload, 9.5KB Jumbo Frame support, EEE Energy Efficient EthernetIEEE 802.1Qav Audio-Video-Bridging (AVB) enhancements for time-sensivitive streamsIEEE 1588 and 802.1AS packets hardware-based time stamping for high-precision time synchronizationBackplane Gigabit Ethernet option w. S80-P6 mezzanine module - Marvell Peridot switchBackplane Gigabit Ethernet option w. S82-P6 mezzanine module - 4 x Intel® I210-IT NICOption front panel M12 X-coded GbE ports with SCL-RHYTHM side card (8HP front panel width)ChipsetIntel® CM238 Mobile Workstation Platform Controller Hub (PCH)PCIe Gen3 8GT/sSATA 6GUSB3GbELPC, Audio, LegacyOn-Board Building BlocksAdditional on-board devices, PCIe® based1 x Gigabit Ethernet controller Intel® I210IT1 x Gigabit Ethernet PHY Intel® I219LMIEEE 1588-2008 Precision Time Protocol supported including PPS and PPM signalsSATA 6G RAID controller Marvell® 88SE9230 ARM powered subsystem for host CPU offloadSecurityTrusted Platform ModuleTPM 2.0 for highest level of certified platform protectionInfineon Optiga™ SLB 9665 cryptographic processorConforming to TCG 2.0 specificationAES hardware acceleration support (Intel® AES-NI)Front Panel I/O (4HP)2 x Gigabit Ethernet RJ45 (1 = PCH & I219LM - Intel® AMT, 2 = I210IT)2 x DisplayPort (from processor integrated HD graphics engine, standard latching DP receptacles2 x USB 3.0Option 2 x Type-C USB 3.1 Gen1 (requires low profile mezzanine expansion card w. front panel I/O)Support for Type-C locking plugs (dual screw) according to the 'Locking Connector Spec. Rev. 1.0'Option DisplayPort Alt Mode on lower Type-C connector (3rd video monitor output)CompactPCI® Serial Backplane ResourcesPICMG® CPCI-S.0 CPU card & system slot controller16 x PCIe Gen3 8GT/s (2 links x 8 for two fat pipe slots, derived directly from the Intel® Xeon® or Core™ CPU6 x PCIe Gen3 8GT/s (6 links x 1 for peripheral slots)2 x SATA 6G (from CM238 PCH)4 x SATA 6G (Marvell hardware RAID controller)5 x USB2, 3 x USB3 (from CM238 PCH)Option 8 x Gigabit Ethernet Marvell 88E6390 switch, requires S80-P6 low profile mezzanine expansion cardOption 4 x Gigabit Ethernet Intel® I210-IT NIC, requires S82-P6 low profile mezzanine expansion cardLocal Expansion & Mezzanine Mass Storage OptionsMezzanine side card connectors for local expansionLow profile mezzanine modules available (4HP front panel) and also side cards (8HP F/P assembly)P-EXP - Legacy (from PCH)P-HSE1 - configurable as 4 x SATA 6G or 4 x PCIe (from CM238 PCH), 1 x USB3P-HSE2 - 4 x PCIe (from CM238 PCH) & 3rd DisplayPort (from CPU)4HP Low profile mezzanine module preferred options:C47-MSATA Mezzanine module - 2 x mSATA SSD socketsC48-M2 Mezzanine module - 2 x M.2 2280 SATA SSD socketsS20-NVME Mezzanine module - 1 x M.2 2280 NVMe SSD socket, 1 x Type-C USB F/P connectorS40-NVME Mezzanine module - 1 x M.2 2280 NVMe SSD socket, 1 x M.2 2280 SATA SSD socket, 2 x Type-C USB F/P Connector (1 connector enabled for DisplayPort alternate mode)S80-P6 Mezzanine module - 1 x M.2 2280 NVMe SSD socket, 8 x Gigabit Ethernet via P6 backplane connector (TSN/AVB switch based solution)S82-P6 Mezzanine module - M.2 NVMe SSD & 4 x GbE NIC via P6 backplane connectorCustom specific storage & I/O mezzanine module design8HP/12HP Mezzanine side card optionsSCL-RHYTHM Quad port GbE NIC, front panel M12 X-coded receptacles, dual M.2 (NVMe/SATA) SSDSCZ-NVM Dual M.2 NVMe SSD, quad UARTP01-M12 Replacement for RJ45 GbE jacks by M12-X receptaclesCustom specific side card design - I/O and storageEnvironmental & RegulatorySuitable e.g. for industrial, transportation & instrumentation applicationsDesigned & manufactured in GermanyISO 9001 certified quality managementLong term availabilityRugged solutionCoating, sealing, underfilling on requestLifetime application supportRoHS compliantOperating temperature 0°C to +70°COperating temperature -40°C to +85°C (industrial temperature range) on requestStorage temperature -40°C to +85°C, max. gradient 5°C/minHumidity 5% ... 95% RH non condensingAltitude -300m ... +3000mShock 15g 0.33ms, 6g 6msVibration 1g 5-2000HzMTBF 11.9 yearsEC Regulatory EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)RT OS Board Support Packages & DriverLynxOS - on requestOn Time RTOS-32 - on requestOS-9 - on requestQNXReal-Time Linux (RT Patch) - on requestRTX - on requestVxWorks 5.5 & 6.9 - on requestVxWorks 7.0 - on requestOthers - on request

Recommended Products For EKF