im-tek.com

Tecsis EZE15 Aluminium Diecast Housing

Tecsis

Product Code: EZE15
Brand: Tecsis



GET OFFER: info@imtek.com.tr

Description for Tecsis EZE15 Aluminium Diecast Housing

Strain gauge amplifiers are used to transform the mV/V output-signals of strain gauges in amplified signals with a higher fault resistance. By the use of an amplifier it is also possible to connect sensors to displays and controlling units with the need for an amplified signal.  The model EZE15X004 is provided with a very robust housing and  two mounting bores in the housing allow to mount the amplifier at fitting locations. The die casting housing is designed for harsh environments according to protection class IP 67.FeaturesStrain gauge amplifier in robust field housing Outputsignals 0/4...20mA or 0...±10 V or 0...±5 V (3-Wire) Accuracy 0.02% of full scale Limit frequency up to 1kHz (-3db) for dynamic applications Also available with 5 KHz (-3db) or 10 kHz (-3db) (optional)Needed power supply 16-32 VDC (optional 8-16 VDC)Can be used with load cells with 100% Control-shuntCompact designZero point, span and filter arbitrary adjustableSmall design Protection class IP 67 ApplicationIn combination with force transducers or load cells the strain gauge amplifier EZE15X004 can be used in applications to measure forces or in industrial weighing. It is possible to connect all kinds of strain gauges with an output signal between 0.9 mV/V up to 3 mV/V. The internal sensor supply can be chosen by a switch and is either 5 or 10 VDC. Usually the amplifier is not pre-adjusted and the customer connects it to the force transducer and also adjusts it. Because of the 3-wire analogue output with 4...20 mA, 0...10 V or 0...5 V and the needed supply energy for the amplifier between 16 and 36 V it is possbile to connect the amplifier directly to PLC. Those normaly come with matching analogue inputs which offer a supply energy of 24 V. There is also a version available which needs a supply energy between 8-16 VDC (not available for outputsignal 0...10 V).

Recommended Products For Tecsis


Tecsis F1224 Miniature Compression Load Cell From 1 kN
Tecsis FSK01 Test Set For Measurement Of Electrode Forces
Tecsis F9302 Strain sensor
Tecsis F53S8 Load Pin
Tecsis F1222 Compression Force Transducer
Tecsis F23C1 Tension/Compression Force Transducer
Tecsis F73C1 Tension Link
Tecsis F1125 Hydraulic Compression Force Transducer
Tecsis F4818 Single Point Load Cell
Tecsis F23C4 Tension/Compression Force Transducer
Tecsis F9204 Wire Rope Force Transducer
Tecsis E1932 Strain Gauge Weighing Electronic
Tecsis F1270 High-Capacity Load Cell
Tecsis AZK01X711 Self-Aligning Bearing
Tecsis EZE20X006 Digital Amplifier
Tecsis E3906 Hand-held Strain Gauge Measuring Instrument
Tecsis AZK01X712 Self-Aligning Bearing
Tecsis F2304 Tension/Compression Force Transducer
Duesterloh FL 960.16C Hydro Gearmotors and Hydro Brake Gearmotors
Grundfos CR 5-18 A-A-A-E-HQQE Multi Stage Pump
Doseuro VSCS 14N 3/4
Faulhaber 22E 546:1 Planetary Gearhead
Gamak AGM2E 90 L4 Motor
Bürkert 8026 00560871 Flowmeter
Grundfos NK 32-200/216 AA1F2AESBAQEGW3 Pump
Vogel 351-600-50000-00 Single-line - Piston Metering Device
Goldammer IND-GB-107, Indicator - LT - 2 -R (remote installation), Level-Temperature controler with PNP level and PNP switching outputs
Hirschmann RSPS25 Power Rail Switch
Sensitron S4161BZ Sensor Head
Hengstler AD36/1213EF.0RSC0 Absolute Encoder
Gemü Gemü 817R50D 72114 172 6400 Flowmeter
Westcode W1074YH260 Rectifier Diode
Stenflex A-1 Rubber Compensator
Wilkerson WRA171 Series High Precision Regulator
Enerpac RC10K50 Rc10 Ton Standard Repaır Kıt
Gat ESR 160 Slip Rings
Parker DF2050220QVM3HD802 Duplex Filter
Gestra NRGS 15-1 Level Switch
Fisher 3024C Pneumatic Diaphragm Actuator
Scherzinger 5030-130-DM-150-6-Exd Stainless Steel Gear Pumps 5030
Persta 700 JT DN 50-150 PD 10 High Pressure Gate Valve DSK 10
Adler FN2 DN100 SPLIT BODY BALL VALVES