The proNet module allows the features of amGardpro to become distributed IO (input-output) on an Ethernet/IP network; safety information is exchanged using the CIP Safety extensions. The unit can connect the following modules to an Ethernet/IP network; see individual datasheets for further details of the modules:• A proLok safety switch with a vast array of options using modular adaptors, heads and actuators in the   amGardpro range.• An e-stop and an external safety switch.• Up to eight lamps and pushbuttons from the proOption Pod range.All the safety signals are communicated via CIP Safety, while standard IO via Ethernet/IP.An integrated network switch facilitates ‘daisy-chain’ bus topologies with no additional hardware.Variety of connection options: PF07, PF09, PF10, PF11IP-address settable via web interface, DHCP or dip switchesDevice diagnostic information available via on board LEDs Diagnostic functions available via web interface: • Supply voltage• Ethernet connection statisticsNAMEPRONET - ETHERNET/IP - CIP SAFETY COMMUNICATION MODULEPART NO.PRONETRANGEHeavy Duty Guard Locking with PROFIsafe & CIP Safety - amGardpro