United Electric One Series Pressure and Temperature Transmitter-Switches

United Electric

Product Code: 1XSWLL-THC20
Brand: United Electric



GET OFFER: info@imtek.com.tr

Description for United Electric One Series Pressure and Temperature Transmitter-Switches

Each One Series model incorporates intelligent self-diagnostics and can report detected faults before they become major safety issues. Plug Port Detection protects against sensor clogging. Nuisance trip filtering reduces false and spurious signals. The ability to capture pressure spikes and valleys provides process information to aid in the commissioning and debugging process.Consider a highly repeatable and fully adjustable deadband switch for applications where high cycle rate is present. With no moving parts, the One Series digital solid-sate design is uniquely suited for controlling pump and compressor stop/start cycles. And with its digital process display and HART®– Enabled 4-20 mA output, the One Series can provide the functions of a switch, gauge and a transmitter with only one connection to the processFor plant upgrades, the One Series is the most cost-effective choice. 2-Wire models utilize existing plant wiring and control schemes. Loop-powered hybrid transmitter models provide high-capacity switching and a 4-20 mA output. 4-wire models can handle currents up to 10 amperes at 240 VAC.Adjustability, accuracy, versatility, intelligence – see what the One Series can do in your critical application.HighlightsFeaturesDigital process and status displayFully adjustable set point and deadbandLocal and remote self-diagnostic reportingAgency certifications for hazardous locationscULus, IECEx, GOST, CE and ATEXClass I, Division 1 & 2 models availableZones 0, 1 & 23 ways to power the control –2-wire discrete input powerLoop-powered analog inputExternal power supply2 ways to program the control –Local keypad and displayRemote HART® communicatorMultiple sensor types and ranges –Gage pressure from full vacuum up to 6000 psi (413,7 bar)Differential pressure up to 200 psid (13,8 bar d)RTD temperature from -300 to 1,000°F (-184 to 538°C)3 models to choose from2-wire low power single switch (only)Loop-powered Hart Transmitter plus 2 solid-state relaysLoop-powered Hart Transmitter (only)BenefitsLiquid crystal display provides the process variable, self diagnostics information and alarm statusIAW® (I Am Working) self-diagnostics constantly monitor the health status of the control to eliminate the “blind switch” issue2-Wire models drop in place of existing mechanical switches and use the same wiring and control schemes providing a cost-effective upgrade pathLoop-powered models provide a HART 4-20 mA transmitter output and include programmable solid-state relay (SSR) switches effectively replacing a transmitter, switch and a gaugeAll transmitter and switch functions are programmable using a HART communicator or the keypad on the displayTwo independent SSRs combine with a 4-20 mA output for stop/start, window mode and starting permissive applicationsSolid-state design allows for switching in high cycle rate applications without degredationOption M041 provides certified dual seal pressure sensorDual Seal Certified?cUL certified to ANSI/ISA 12.27.01Complies with CEC rule 18-072 and NEC 501.17 requirements for providing a secondary seal between the process and electrical connections, and indication of primary seal failure should one occurDecrease labor time and cost by eliminating externally connected secondary sealsProvides HART communication for all transmitter and switching functions. *Option M041 is Required. 1XSWLL-THC20 2X2D00TRC 1XSWLL-TRC-8' 4W3A01P12 1XTXSW-THC20 8W2D42-K-11 2W-15859 8W2D44THC 2W2D00THC 2W3A00P15 2W3A00K13      

Recommended Products For United Electric