Product Name: Gestra UNA 45V DN25 PN40 FLANSCH EN PN40 DUPLEX
Brand: Gestra
Product Code: UNA 45V DN25 PN40 FLANSCH EN PN40 DUPLEX
Tags: Gestra
UNA DN25 PN40 FLANSCH PN40 DUPLEX
Gestra UNA DN25 PN40
UNA 45V
Gestra UNA 45V PN40 FLANSCH
Gestra UNA DN25 FLANSCH DUPLEX
Gestra 45V FLANSCH EN PN40
EN DUPLEX
Gestra UNA DN25 PN40 EN
Gestra UNA FLANSCH PN40 DUPLEX
Gestra 45V DN25 FLANSCH EN PN40 DUPLEX
UNA 45V PN40 EN DUPLEX
Gestra UNA 45V FLANSCH EN
Gestra 45V FLANSCH EN PN40 DUPLEX
Gestra DN25 EN DUPLEX
UNA DN25 PN40 DUPLEX
Gestra UNA PN40 FLANSCH EN PN40
45V PN40
Gestra UNA PN40 FLANSCH EN DUPLEX
DN25 PN40 EN PN40
Gestra UNA PN40 DUPLEX
Ball Float Steam Trap UNA 45
Are you interested in the product Gestra UNA 45V DN25 PN40 FLANSCH EN PN40 DUPLEX from manufacturer Gestra with code UNA 45V DN25 PN40 FLANSCH EN PN40 DUPLEX? Contact us now and get offer. Imtek Engineering, the fastest and most reliable industrial equipment supplier in the world, will offer you the best offer!
Get Offer With E-Mail: info@im-tek.com
Get a offer for Gestra UNA 45V DN25 PN40 FLANSCH EN PN40 DUPLEX from our live support team now!
Description Float traps type UNA 45 are designed for removing condensate from steam or compressed air. Float traps type UNA 46 and UNA 46A are designed for removing condensate from steam or other gases / gas mixtures. Equipment fitted with control unit SIMPLEX and SIMPLEX-P is operated and controlled by the float and the rolling ball. Equipment with this type of control unit is particularly suitable for cold condensate and cold distillates. The rolling ball of the control unit SIMPLEX-P is made of Perbunan® rubber, which ensures tight shut-off of the seat. Equipment with control unit DUPLEX may also be used for air venting the installation. This type of control unit is particularly suitable for saturated steam systems. The control unit DUPLEX consists of a float operated rolling ball valve and a temperature dependent air-venting facility. Do not expose the membrane regulator capsule of the DUPLEX control unit to superheat conditions above 5 K. By means of the externally adjustable internal bypass it is possible to adjust a bypass passage that flows past the control unit. The equipment must only be used within the allowable pressure and temperature limits and only if the chemical and corrosive influences on the equipment are taken into account.