Due to its non-pedestal design and impeller
equipped with front and rear blades,
the RCEV pump
type is highly
suitable for handling solids-laden liquids. It is possible to pump up to
30 percent solids with this
type of pump,
where the type and composition of the solids
(hard, soft, light
or heavy) plays
a important role. The decision whether
to use an open or closed impeller depends heavily on the type
of the solids.
The RCEV

is used to convey mechanically contaminated, corrosive or neutral liquids such as phosphoric acid,
highly contaminated sulphur, titanium
dioxide slurries, copper dissolution acids as well as liquids that cannot tolerate
localised heating by sliding
bearings, e.g. concentrated ammonium nitrate solutions, DNT mixtures.

•  Capacities to 900 m³/h | 3963 GPM

•  Heads to 85 m | 180 ft

•  Temperature ranges from

-40 °C to 200 °C | -40 °F to 392 °F

•  Pressures to 10 bar | 145 PSIG

Applications:

•  Dirty sulphur

•  Fertilizer

•  Phosphate fertilizer

•  Solids-containing fluids

•  Sulphuric acid

•  Ammonium Nitrate

Materials:

• 
9 different
cast irons, cast steels and high alloy cast steels