Electrical interface
* Signal type: PROFIBUS (DP-V0, DP-V1, DP-V2 und FMS)
* Bit rate: 9.6; 19.2; 45.45; 93.75; 187.5; 500 kbit/s;
* 1.5; 3; 6; 12 Mbit/s (automatic setting)
* Signal delay time (optional input/output): <= 6.5 bit times
* Input/output signal: RS 485 level
* Input voltage: range -7 V … +12 V
* Galvanic isolation: no
Optical interface
* Wavelength: 860 nm
* Cascadibility: not limited
More Interfaces
* Power supply: 5-pin terminal block, screw Mounting
* Signaling contact: 5-pin terminal block, screw Mounting
* Measuring outputs: "Optical input power" 3-pin terminal block, screw Mounting
Network size – length of cable
* Single mode fiber (SM) 9/125 µm: –
* Multimode fiber (MM) 50/125 µm: 3000 m
* 13 dB link budget at 860 nm; A = 3 dB/km, 3 dB reserve
* Multimode fiber (MM) 62.5/125 µm: 3000 m
* 15 dB link budget at 860 nm; A = 3.5 dB/km, 3 dB reserve
* Multimode fiber HCS (MM) 200/230 µm: 1000 m
* 18 dB link budget at 860 nm; A = 8 dB/km, 3 dB reserve
* Multimode fiber POF (MM) 980/1000 µm: –
Power requirements
* Operating voltage: 18 … 32 VDC, typ. 24 VDC
* Galvanic isolation: yes
* Current consumption: max. 200 mA
* Power consumption: 4.8 W
* Output voltage/output current: (pin6) 5 VDC +5%, -10%, short circuit-proof/90 mA
Redundancy
* Redundancy functions: HIPER-Ring (ring structure), redundant 24 V infeed
Ambient conditions
* Operating temperature: 0 ºC to +60 ºC
* Storage/transport temperature: -40 ºC to +70 ºC
* Relative humidity: <95% (non-condensing)
Mechanical construction
* Dimensions: (W x H x D) 35 x 156 x 119 mm
* Mounting: DIN rail
* Weight: 200 g
* Protection class: IP 20
* Housing material: plastics
Approvals
* Safety of information technology equipment: cUL 508
* Hazardous locations: ISA 12.12.01 Class 1 Div. 2; ATEX Zone 2