BECKHOFF KL5001 SSI Encoder Interface

The KL5001 SSI interface terminal enables the direct connection of an SSI encoder that is powered via the SSI interface. The interface circuit generates a pulse for reading the encoder and makes the incoming data stream available to the controller as a data word in the process image. Various operating modes, transmission frequencies and bit widths can be permanently stored in a control register. A screen can be connected via the KL9195 shield terminal.

Technical dataKL5001 | KS5001TechnologySSI encoder interfaceNumber of channels1 encoder interfaceEncoder connectionbinary input: D+, D-, binary output: Cl+, Cl-Power supply24 V DC via power contactsCurrent consumptiontyp. 20 mA without encoderCurrent consumption power contactstyp. 20 mA + loadEncoder supply24 V DC via power contactsData transfer ratesvariable up to 1 MHz, 250 kHz defaultSerial input24 bit width (variable)Data directionreadSignal outputdifference signal (RS422)Signal inputdifference signal (RS422)Electrical isolation500 V (K-bus/field potential)Current consumption K-bustyp. 25 mABit width in the process imageinput: 1 x 32 bit data (1 x 8 bit control/status optional)Weightapprox. 60 gOperating/storage temperature-25…+60 °C/-40…+85 °CRelative humidity95 %, no condensationVibration/shock resistanceconforms to EN 60068-2-6/EN 60068-2-27EMC immunity/emissionconforms to EN 61000-6-2/EN 61000-6-4Protect. class/installation pos.IP 20/variablePluggable wiringfor all KSxxxx Bus TerminalsApprovalsCE, UL, Ex

Nessuna descrizione generica disponibile al momento