Fisher 99 Pressure Reducing Regulator

Fisher™ Type 99 Pressure Reducing Regulator

Fisher Type 99 gas regulator provides controlled pressure ranges and capacities for distribution, industrial, and commercial applications. Type 99 regulator has a Type 61 pilot integrally mounted to the actuator casing. Type 99 regulator can handle up to 1000 psig / 69.0 bar inlet pressures. This regulator comes standard with O-ring seals on the guide bushing and valve carrier to keep main valve body outlet pressure from interfering with outlet pressure in the lower casing assembly.

FeaturesHigh AccuracyNo Atmospheric BleedCan Handle High Inlet PressuresEasily Modified for Special ServiceTight ShutoffHigh-Capacity Pressure ControlExcellent Low Flow ControlThree Pilots to Choose FromSpecificationsBody Sizes and End Connection StylesNPS 2 / DN 50 body with NPT, CL125 FF, CL150 RF, CL250 RF, CL300 RF end connectionsMaximum Inlet Pressure160 psig / 11.0 bar: Type 61LD pilot
400 psig / 27.6 bar: Types 61L, 61LE, and 61H pilots
1000 psig / 69.0 bar: Type 61HP pilot with Type 1301F and Type H110 (1/2 / 13 mm orifice only)
Maximum Outlet Pressures100 psig / 6.9 barOutlet Pressure Ranges2-inches w.c. to 100 psig / 5 mbar to 6.9 bar in nine rangesPressure RegistrationInternalTemperature CapabilitiesWith Nitrile (NBR) / Neoprene (CR) / Nylon (PA): -20 to 180°F / -29 to 82°C
With Fluorocarbon (FKM): 0 to 300°F / -18 to 149°C
Approximate Weight115 Pounds / 52 kg

Pressure Reducing Regulator