Mts Sensor MS Mobile Hydraulic Position Sensor

Input

Measured value Position

Stroke range 50…2500 mm (in 5 mm steps)

Output

Signal characteristic Analog output restricted by noise or A/D converter of control unit

Voltage 0.25…4.75 VDC / 0.5…4.5 VDC

Current 4…20 mA

Resolution Typ. 0.1 mm

Power up time Typ. 250 ms

Mounting zone 22 mm

Damping 36.5 / 63.5 mm

Accuracy

Linearity

0050…0250 mm ? ±0.1 mm,

0255…2000 mm ±0.04 % (F.S.),

2005…2500 mm ? ±0.8 mm

Repeatability ± 0.1 mm

Internal sample rate 2 ms

Setpoint tolerance ? 1 mm

Operating conditions

Mounting position Any

Operating temperature electronics ?40…+105 °C

Storage temperature ?25…+ 65 °C

Fluid temperature ?30…+ 85 °C

Dew point, humidity EN60068-2-30, 90 % rel. humidity, no condensation

Pressure

Operating pressure ratings Pressure impulse test according DIN EN ISO 19879

Pressure Pipe Ø 7 mm

Nominal operating pressure (Pn) 300 bar

Max. overload pressure in cylinder (Pmax) 400 bar

Max. static proof pressure in cylinder (Pproof) 525 bar

IP rating

M12 connector EN60529 (IP69K) when plugged

Sensor housing EN60529 (IP67)

Environmental testing

Shock test IEC 60068-2-27, 100 g (11 ms) single shock, 50 g (11 ms) at 1000 shocks per axis

Vibration test IEC 60068-2-64, 15 g (r.m.s.) Ø 7 mm pressure pipe (10…2000 Hz) – resonance frequencies excluded

EMC

test & evaluation

ISO 14982 Agricultural and forest machines

EN 13309 Construction machines

Immunity: ISO 11452-2 (200 V/m Antenna), ISO 11452-4 (200 mA BCI)

Emissions: CISPR 16

Transiente Impulses: ISO 7637-2

E.S.D.: ISO/TR 10605

Materials and dimensions

Pressure pipe Stainless steel 1.4306 / AISI 304L

Housing Stainless steel 1.4305 / AISI 303

Sealing O-ring 23.47 ×2.62 mm NBR; Backup Ring 28 × 2 × 1.4 mm, Parker Parbaks 8-119 N1444-90 or 8-119 N0300-90

M12 connector insert Material: polyamide reinforces; O-ring 7 × 1.35 mm NBR 70; pins: brass with gold plated pins

M12 flange Brass nickel-plated with O-ring 13 × 1.6 NBR 70

Electrical installation

Connector M12 male plug or cable assembly

Supply voltage 12 VDC (8…32 VDC) 24 VDC (8…32 VDC)

Current consumption Typ. < 100 mA Typ. < 50 mA

Load (output VDC) RL> 10 k? RL> 10 k?

Load current (output VDC) Typ. 0.5 mA Typ. 0.5 mA

Loud (output mA) RL < 250 ? RL < 500 ?

Inrush current Max. 2.5 A/2 ms Max. 4.5 A/2 ms

Supply voltage ripple < 1 % p-p

Power drain < 1 W

Over voltage protection (GND-VDC) Up to +36 VDC

Polarity protection (GND-VDC) Up to ?36 VDC

Insulation Resistance R ? 10 M? @ 60 sec

Electric strength 500 VDC (DC GND to chassis GND)