im-tek.com

Italvibras MVSI 10/810-S08-TS 602380 Electric Vibrator with Split Cover

Italvibras

Product Code: MVSI 10/810-S08-TS
Artikelnummer: 602380
Brand: Italvibras



GET OFFER: info@imtek.com.tr

Description for Italvibras MVSI 10/810-S08-TS 602380 Electric Vibrator with Split Cover

Power supply Three-phase voltage from 48V to 690V, 50Hz or 60Hz; suitable for use with an inverter from 20Hz to the base frequency, with constant torque load profile. Polarity 4, 6 and 8 poles. Conformity with Standards and Regulations Low Voltage Directive 2006/95/EC; EN/IEC 60034-1; UL 1004-1, CSA C22.2 No.100, NEMA MG-1. Functioning Continual service (S1) at maximum declared centrifugal force and electric power. Intermittent services are also possible depending on the type of vibrator and the operating conditions. For detailed information contact our technical assistance office. Centrifugal force Range extended up to 30500 kgf. (300 kN), with centrifugal force adjustable by varying eccentric weights position.. Mechanical protection IP 66 according to IEC/EN 60529Protection against mechanical impacts IK 08 according to IEC/EN 62262. Insulation class Class F (155°C), class H (180°C) on request. Tropicalization Standard on all vibrators with “drop by drop” trickle system. Ambient temperature From -20°C to +40°C. Versions for higher or lower temperatures are available on request. Vibrator thermal protection Standard PTC rated thermistor heat detectors 130°C from size 70, on request for smaller sizes. On request, thermistors with different temperatures and anti-condensation heaters. Fixing of the vibrator In all positions and therefore without restriction. Lubrication All vibrators are correctly lubricated in the factory and do not require further lubrication at start-up. Terminal box Large terminal box to facilitate electrical connection. Special shaped terminals allow for the power supply cable to be secured, whilst protecting it from loosening. Electric motor Three-phase asynchronous type. Designed for maximum starting torques and torque curves specific to vibrating machines. 

Recommended Products For Italvibras


Italvibras MVSI 10/3000-S02 602230 Electric Vibrator
Italvibras MVSI 3/1600-S02 600502 Electric Vibrator
Italvibras MVSI 075/3110-S02 602884 Electric Vibrator
Italvibras MTF 10/13000-S02-ACC 602101 Axial Coupling Flanged Electric Vibrator
Italvibras MVSS 15/100-S02 601365 Electric Vibrator in Stainless Steel
Italvibras CDX 075/660-G/D 602581 Explosion Proof-electric Vibrator
Italvibras MVSI 10/11200-S02 602349 Electric Vibrator
Italvibras MVSI 10/13000-S02-TS 602227 Electric Vibrator with Split Cover
Italvibras ITV-VR/2010 600247 High-frequency Electric Vibrator
Italvibras VR 8000/6-S08 0605048 Rotational Motion Exciter
Italvibras VR 27500/6-S08 0605058 Rotational Motion Exciter
Italvibras MVSI 10/5200E-S02 6E2138 Increased Safety Electric Vibrator
Italvibras MVSI 075/4200-S02 602862 Electric Vibrator
Italvibras CDX 15/1100-G/D 601413 Explosion Proof-electric Vibrator
Italvibras MVSI 075/6800-S02 602551 Electric Vibrator
Italvibras ITVAF 6/3300 603010 High-frequency Electric Vibrator
Italvibras ITVAF 9/1110-S08 604041 High-frequency Electric Vibrator
Italvibras MVSI 15/6000-S02 601447 Electric Vibrator
Bernard Controls BCI0057416 AT25 Actuators
Vogel MKU2-KW6-20001 428 Single Line Pump
Vulcanic 2506-02 Flange Immersion Heater
Knf N 816 KN.29 DC-B Vacuum Pump
TB Woods SF16E Coupling
FIP Italy SRIM Series DN 15÷50 Ball Check Valve
Apv VPN Check Valve
Tempco CAST-IN CROSS HEAD DIE HEATERS
SKF 6034-M/C3 Bearing
SKF 628/6-2Z Deep Groove Ball Bearings
Festo DGC-K-40-2980-PPV-A-GK Piston Festo DGC-K-40-2980-PPV-A-GK Piston
Metalwork 4681001U LUB 300 1
Intra IBF-66 Flow Sensor
Tokimec TGMDC-3, 51 series Check Valves
Atos DHE-07139-X-24DC Solenoid Valve
Schorch BD7 225M Three-phase-motor
Stenflex Type SG-10 DN 15 Expansion Joint
Jaquet DSF 1410.03 AHV Speed Sensor
Mahle Pi 5245 PS vst 6 77955149 Duplex Filter
Emod Type: 71 S/4 EHB Single Phase Motor
Hansa-TMP CFM404G114 Flanges and Pipe Fitting
Vulcanic 2029-41 Flange Immersion Heater
Oiles OILES 2000 Sintered multi-layer composite bearings with finely divided solid lubricant
KSB BPI 322/06B+UMAH 150-15/23 4.0 SQMM SD. Pump