im-tek.com

Italvibras MVSI 10/9000-S90-TS 602093 Electric Vibrator with Split Cover

Italvibras

Product Code: MVSI 10/9000-S90-TS
Artikelnummer: 602093
Brand: Italvibras



GET OFFER: info@imtek.com.tr

Description for Italvibras MVSI 10/9000-S90-TS 602093 Electric Vibrator with Split Cover

Power supply Three-phase voltage from 48V to 690V, 50Hz or 60Hz; suitable for use with an inverter from 20Hz to the base frequency, with constant torque load profile. Polarity 4, 6 and 8 poles. Conformity with Standards and Regulations Low Voltage Directive 2006/95/EC; EN/IEC 60034-1; UL 1004-1, CSA C22.2 No.100, NEMA MG-1. Functioning Continual service (S1) at maximum declared centrifugal force and electric power. Intermittent services are also possible depending on the type of vibrator and the operating conditions. For detailed information contact our technical assistance office. Centrifugal force Range extended up to 30500 kgf. (300 kN), with centrifugal force adjustable by varying eccentric weights position.. Mechanical protection IP 66 according to IEC/EN 60529Protection against mechanical impacts IK 08 according to IEC/EN 62262. Insulation class Class F (155°C), class H (180°C) on request. Tropicalization Standard on all vibrators with “drop by drop” trickle system. Ambient temperature From -20°C to +40°C. Versions for higher or lower temperatures are available on request. Vibrator thermal protection Standard PTC rated thermistor heat detectors 130°C from size 70, on request for smaller sizes. On request, thermistors with different temperatures and anti-condensation heaters. Fixing of the vibrator In all positions and therefore without restriction. Lubrication All vibrators are correctly lubricated in the factory and do not require further lubrication at start-up. Terminal box Large terminal box to facilitate electrical connection. Special shaped terminals allow for the power supply cable to be secured, whilst protecting it from loosening. Electric motor Three-phase asynchronous type. Designed for maximum starting torques and torque curves specific to vibrating machines. 

Recommended Products For Italvibras


Italvibras MVSI 3/2010E-S90 6E0256 Increased Safety Electric Vibrator
Italvibras MVSI 10/810-S08-TS 602380 Electric Vibrator with Split Cover
Italvibras MVSI 3/2010-S90 600256 Electric Vibrator
Italvibras MTF 15/200E-S02 6E1403 Increased Safety Electric Vibrator with Top Mounting Flange
Italvibras MVSI 3/6510-S02 600276 Electric Vibrator
Italvibras MVSI 10/30000-S02-TS 602336 Electric Vibrator with Split Cover
Italvibras MVSI 10/17500-S02 602143 Electric Vibrator
Italvibras MVSI 15/11500-S02 601205 Electric Vibrator
Italvibras MTF 10/5150-S02-ACC 602013 Axial Coupling Flanged Electric Vibrator
Italvibras MVSI 075/6500-S90-TS 602827 Electric Vibrator with Split Cover
Italvibras MTF 3/700E-S02 6E0456 Increased Safety Electric Vibrator with Top Mounting Flange
Italvibras VU 8000/6-S08 0605021 Unidirectional Motion Exciter
Italvibras MVCC 3/1200 600405 Direct Current Electric Vibrator
Italvibras MTF 3/65-S02 600375 Electric Vibrator with Top Mounting Flange
Italvibras MVSI 15/550E-S02 6E1373 Increased Safety Electric Vibrator
Italvibras VR 14000/6-S08 0605053 Rotational Motion Exciter
Italvibras MVSI 075/6500-S90 602827 Electric Vibrator
Italvibras ITVAF 6/2010-S90 603037 High-frequency Electric Vibrator
Böhmer DHG L 250.712-1 High Pressure Three-way Ball Valve With Threaded P
SKF 6007-2RS1/C3 Bearing
Edur PBU321G10.1-2900 Multiphase Pump
ETP HS 3/4
Meidinger 160-3 Blower
Eaton Vickers (Danfoss) 35V38 Cartridge
Desch Revox® HE Series Ship Hybrid Module
Vogel MKU1-12AE11000 428 Single Line Pump
Winsmith 8MCVD Double Reduction Motorized and Gearmotor Speed Reducer
Winsmith U2620S14 RD Speed Reducer
Stauff CAG-305-ES-38.5/32-W1 Counterflange Adaptor
Unimec RC110 C2 S/N:7078-COL Gearbox
Hengstler AC58/1212EK.72OLB Absolute Encoder
PCM EDSA-10410 Static Mixer
STM RMI 70 F3 1/28 80B14 Service Point
Scherzinger 5030-130-B-DM-55-6-Exe Stainless Steel Gear Pumps 5030
Ham-let Male H-400 Check Valve
Bürkert 00559610 Conductivity Meter
ETP HYDRO-GRIP B-60/70-190 Sleeve
SKF HMSA10-RG Dim:320x360x20mm Seal Oil
Eaton Internormen 01.E 30.40G.30.E.P Filter Element
Atlas Copco 2901205300 Filter Kit
Tempco MODEL TEC-900 TEMPERATURE CONTROLLER
Eurotherm P116/CC/VH/RX/R/4CL/ Controller Eurotherm P116/CC/VH/RX/R/4CL/ Controller