im-tek.com

Italvibras MVSI 15/2000-S02-TS 601267 Electric Vibrator with Split Cover

Italvibras

Product Code: MVSI 15/2000-S02-TS
Artikelnummer: 601267
Brand: Italvibras



GET OFFER: info@imtek.com.tr

Description for Italvibras MVSI 15/2000-S02-TS 601267 Electric Vibrator with Split Cover

Power supply Three-phase voltage from 48V to 690V, 50Hz or 60Hz; suitable for use with an inverter from 20Hz to the base frequency, with constant torque load profile. Polarity 4, 6 and 8 poles. Conformity with Standards and Regulations Low Voltage Directive 2006/95/EC; EN/IEC 60034-1; UL 1004-1, CSA C22.2 No.100, NEMA MG-1. Functioning Continual service (S1) at maximum declared centrifugal force and electric power. Intermittent services are also possible depending on the type of vibrator and the operating conditions. For detailed information contact our technical assistance office. Centrifugal force Range extended up to 30500 kgf. (300 kN), with centrifugal force adjustable by varying eccentric weights position.. Mechanical protection IP 66 according to IEC/EN 60529Protection against mechanical impacts IK 08 according to IEC/EN 62262. Insulation class Class F (155°C), class H (180°C) on request. Tropicalization Standard on all vibrators with “drop by drop” trickle system. Ambient temperature From -20°C to +40°C. Versions for higher or lower temperatures are available on request. Vibrator thermal protection Standard PTC rated thermistor heat detectors 130°C from size 70, on request for smaller sizes. On request, thermistors with different temperatures and anti-condensation heaters. Fixing of the vibrator In all positions and therefore without restriction. Lubrication All vibrators are correctly lubricated in the factory and do not require further lubrication at start-up. Terminal box Large terminal box to facilitate electrical connection. Special shaped terminals allow for the power supply cable to be secured, whilst protecting it from loosening. Electric motor Three-phase asynchronous type. Designed for maximum starting torques and torque curves specific to vibrating machines. 

Recommended Products For Italvibras


Italvibras MVSS 075/1310-S08 602622 Electric Vibrator in Stainless Steel
Italvibras MVSI 3/6510-S02 600276 Electric Vibrator
Italvibras MVLS 075/7500-S90 602536 Low Speed Electric Vibrator
Italvibras MTF 15/550-S02 601406 Electric Vibrator with Top Mounting Flange
Italvibras MVSI 10/10000-S02 602137 Electric Vibrator
Italvibras MVSI 3/300E-S02 6E0313 Increased Safety Electric Vibrator
Italvibras MVSI 3/1800E-S02 6E0503 Increased Safety Electric Vibrator
Italvibras MVSI 15/2410E-S08 6E1220 Increased Safety Electric Vibrator
Italvibras MVSI 3/1300E-S08 6E0491 Increased Safety Electric Vibrator
Italvibras MVB 7000/15 601131 Electric Vibrator with Top Mounting Flange
Italvibras MVSI 10/5200-S02-TS 602138 Electric Vibrator with Split Cover
Italvibras MVSI 075/1750-S08-TS 602619 Electric Vibrator with Split Cover
Italvibras MVSI 10/25000-S90-TS 602273 Electric Vibrator with Split Cover
Italvibras MVSI 10/2610-S02-TS 602167 Electric Vibrator with Split Cover
Italvibras MVSS 15/1710-S02 601350 Electric Vibrator in Stainless Steel
Italvibras MVSI 10/1610E-S08 6E2406 Increased Safety Electric Vibrator
Italvibras MVLS 06/1490-S90 602966 Low Speed Electric Vibrator
Italvibras MVSI 10/22000-S90 602144 Electric Vibrator
Exheat HEF HEF Hazardous Area Enclosure/Cabinet Heaters
Böhmer KSF V 025.200 Ball Valve
Kübler 8.5853.1220.E011.0001.K001 Absolute Encoders Sendix -St-
Atlas Copco 1089943607 Transformer
Aignep SOLU1 SOLENOID 22 MM UL1446 CAN/CSA C22.2
YTC YT2500LSI1221S Smart Positioner Yt-2500
Martens GEMK Weld-on Sleeves
Hansa-TMP F408N212 Flanges and Pipe Fitting
Faulhaber 2250S012BX4S Brushless DC-Servomotor
Winsmith U2050S14 RD Speed Reducer
Gefran ADV-2055-KBX-4 Servo Drive
PIV KSC 214 Variators
Stenflex Type RS-1 DN 50 Expansion Joint
Kadant 995.408/0001 RX Rotary Union
Tellarini JIMG 5 Electric Pump
Gefran F083607 GRS-H-120-48-A-0-FAN60-0-0 Solid State
Eaton Vickers (Danfoss) KBHDG4V 35PE710 Directional Valve
Equalizer MAN4TESTD 4 port manifolded hydraulic hand pump kit
KSB MCPK125-080-400 GG NP2 A Pump
Felm FX 355XB-4 Motor
SKF 6205-2Z Bearing
Haake Technik HST-TZ1-EX 17551 Guard-locking Mechanism
Fybroc 4x4x10 pHP Series Self-Priming Chemical Process Pump
Alfa Laval 9612628558 LKB-2 DN25 DIN W/W EPDM 304L KIT ACT LKLA-T Ø85 NC 6MM