Discover more about JVM® Electromagnetic Vibrators
Electromagnetic
Vibrators Series MS
Tried-and-tested, reliable engineering together with robust,
practice-oriented designs provide high operational reliability, even under the
most difficult conditions.The electromagnetic vibrators generate linear oscillations and
are operated at oscillation frequencies of 50 and 25 Hz or at 60 and 30 Hz. MS
drive units are used in a variety of industries for medium duty dosing,
draw-off and conveying applications. The drive units are also suitable for
clock cycle operation because the maximum oscillation amplitude is reached as
soon as it is started and it comes to a stop immediately after being switched
off.The oscillation amplitude can be infinitely controlled during
the operation of all JVM® electromagnetic
vibrators. Therefore the feed rate can be easily adjusted to the current
requirements. We have summarized information on the required thyristor
controller at Electrical components Adapted model series MS drive units are
available in seven sizes, and also in models for higher effective weights at
lower oscillation amplitudes (MS 30…80). This broad range enables the optimum
drive to be selected for the particular application requirements.The use of high quality components means that JVM® electromagnetic
vibrators are maintenance-free and particularly easy to install. Special
lifting eyes make transport easy, eliminating the need to remove the hoods.Tried-and-tested, reliable engineering together with robust,
practice-oriented designs provide high operational reliability, even under the
most difficult conditions in central lines. All MS electromagnetic vibrators
are EMV-compatible.
In order to allow the oscillation frequency to be altered in
retrospect, the drives have been designed in such a way that they are
interchangeable within a construction size in the oscillation frequencies.
