2001년부터 산업용 부품 및 엔지니어링 솔루션.
독일에서 전 세계로 빠른 배송
다양한 결제 방법다양한 결제 옵션
Janitza 96 RM-EL Power Analyzer Or Technically Equivalent
기술 데이터시트 / 제품 문서
저희에게 연락하세요! 영업일 기준 24시간 이내(주말 및 공휴일 제외) 재고 상태와 예상 납기를 안내해 드립니다.
제품 설명
Janitza의 Janitza 96 RM-EL Power Analyzer Or Technically Equivalent을(를) 포함한 제품은 병행 수입 채널을 통해 조달되며 United States의 고객에게 신속하고 안정적으로 배송됩니다. Imtek Engineering은 경쟁력 있는 가격으로 정품 Janitza 부품을 제공합니다. Janitza 96 RM-EL Power Analyzer Or Technically Equivalent이 당사 웹사이트에 등록되어 있지 않더라도 언제든지 견적을 요청하실 수 있으며, 담당 팀이 신속히 답변 드릴 것입니다.
United StatesPower Analyzer Or Technically Equivalent
General Net weight
265 g
Net weight (with attached connectors)
300 g
Device dimensions
approx. l = 42 mm, b = 97 mm, h = 100 mm
Service life of the backlight
40,000 hours (50% of initial brightness)
Transport and storage The following information applies for devices that are transported or stored in their original packaging.
Free fall 1m Temperature
K55 (-25 °C to +70 °C)
Relative humidity
0 to 90% RH
Ambient conditions during operation The UMG 96RM is intended for use in weather-protected, fixed locations.
Protection class II according to IEC 60563 (VDE 0106, part 1).
Rated temperature range K55 (-10 °C .. +55 °C) Relative humidity
0 to 75 % RH
Operational altitude
0 .. 2000 m above sea level
Degree of pollution
2
Installation position
any
Ventilation
Forced ventilation is not required.
Foreign body and water protection
- Front
- Back
- Front with seal
IP40 according to EN60529 IP20 according to EN60529 IP54 according to EN60529
Power supply voltage Option 230V
Option 24V
Nominal range Power consumption
90V - 277V (50/60Hz) or DC 90V - 250V; 300V CATIII max. 7.5VA / 4W
Nominal range
24V - 90V AC / DC; 150V CATIII
Power consumption
max. 3.5VA / 2W
Operating range
+-10% of nominal range
Internal fuse, not replaceable
Typ T1A / 250V/277V according IEC 60127
Recommended overcurrent protection device for line protection (certified under UL)
Option 230V:
Option 24V:
(Char. B)
6 - 16A 1 - 6A
Recommendation for a maximum number of devices on a circuit breaker:
Option 230V : Circuit breaker B6A: max. 4 devices / Circuit breaker B16A: max. 11 devices
Option 24V : Circuit breaker B6A: max. 3 devices / Circuit breaker B16A: max. 9 devices
Connection capacity of the terminals (power supply) Connectable conductor. Only one conductor may be connected per contact point!
Single-wire, multi-wire, finely stranded conductor 0.2 - 2.5mm2, AWG 26 - 12
Pin terminals, ferrules
0.2 - 2.5mm2
Tightening torque
0.4 - 0.5Nm
Stripping length
7mm
02/2019 • Data sheet UMG 96RM – 3
UMG 96RM
TECHNICAL DATA
265 g
Net weight (with attached connectors)
300 g
Device dimensions
approx. l = 42 mm, b = 97 mm, h = 100 mm
Service life of the backlight
40,000 hours (50% of initial brightness)
Transport and storage The following information applies for devices that are transported or stored in their original packaging.
Free fall 1m Temperature
K55 (-25 °C to +70 °C)
Relative humidity
0 to 90% RH
Ambient conditions during operation The UMG 96RM is intended for use in weather-protected, fixed locations.
Protection class II according to IEC 60563 (VDE 0106, part 1).
Rated temperature range K55 (-10 °C .. +55 °C) Relative humidity
0 to 75 % RH
Operational altitude
0 .. 2000 m above sea level
Degree of pollution
2
Installation position
any
Ventilation
Forced ventilation is not required.
Foreign body and water protection
- Front
- Back
- Front with seal
IP40 according to EN60529 IP20 according to EN60529 IP54 according to EN60529
Power supply voltage Option 230V
Option 24V
Nominal range Power consumption
90V - 277V (50/60Hz) or DC 90V - 250V; 300V CATIII max. 7.5VA / 4W
Nominal range
24V - 90V AC / DC; 150V CATIII
Power consumption
max. 3.5VA / 2W
Operating range
+-10% of nominal range
Internal fuse, not replaceable
Typ T1A / 250V/277V according IEC 60127
Recommended overcurrent protection device for line protection (certified under UL)
Option 230V:
Option 24V:
(Char. B)
6 - 16A 1 - 6A
Recommendation for a maximum number of devices on a circuit breaker:
Option 230V : Circuit breaker B6A: max. 4 devices / Circuit breaker B16A: max. 11 devices
Option 24V : Circuit breaker B6A: max. 3 devices / Circuit breaker B16A: max. 9 devices
Connection capacity of the terminals (power supply) Connectable conductor. Only one conductor may be connected per contact point!
Single-wire, multi-wire, finely stranded conductor 0.2 - 2.5mm2, AWG 26 - 12
Pin terminals, ferrules
0.2 - 2.5mm2
Tightening torque
0.4 - 0.5Nm
Stripping length
7mm
02/2019 • Data sheet UMG 96RM – 3
UMG 96RM
TECHNICAL DATA
자주 묻는 질문
Janitza의 Janitza 96 RM-EL Power Analyzer Or Technically Equivalent에 관한 자주 묻는 질문입니다. Imtek Engineering은 United States에서 Janitza의 Janitza 96 RM-EL Power Analyzer Or Technically Equivalent를 조달하는 데 도움을 드릴 준비가 되어 있습니다.
Imtek Engineering은 신뢰할 수 있는 공급 채널을 통해 정품 Janitza 제품을 조달하여 United States 고객에게 경쟁력 있는 가격으로 제공합니다.
