2001년부터 산업용 부품 및 엔지니어링 솔루션.
독일에서 전 세계로 빠른 배송
다양한 결제 방법다양한 결제 옵션
Leistritz L3Mf060 Pump
기술 데이터시트 / 제품 문서
| 브랜드 |  |
| 카테고리 | 펌프 |
| 제품명 | Leistritz L3Mf060 Pump |
| 제품 코드 | L3Mf060 |
저희에게 연락하세요! 영업일 기준 24시간 이내(주말 및 공휴일 제외) 재고 상태와 예상 납기를 안내해 드립니다.
제품 설명
Leistritz의 Leistritz L3Mf060 Pump을(를) 포함한 제품은 병행 수입 채널을 통해 조달되며 United States의 고객에게 신속하고 안정적으로 배송됩니다. Imtek Engineering은 경쟁력 있는 가격으로 정품 Leistritz 부품을 제공합니다. Leistritz L3Mf060 Pump이 당사 웹사이트에 등록되어 있지 않더라도 언제든지 견적을 요청하실 수 있으며, 담당 팀이 신속히 답변 드릴 것입니다.
United StatesOperation
6.2 Checking operation How to check the pump unit during operation:
1.
Make sure that the differential pressure is at least 1 - 1,5 bar.
2.
Check the pump unit for excessing power consumption, vibrations, increased temperature and leakages. ⮫ Further
information on page 61 🡆 The vibration level must not exceed 4.5 mm/s (rms) continuously or 7.1 mm/s (rms) during the transition states
(guide values).
🡆 The sound pressure level must not exceed the values in the “Technical data” chapter. ⮫ Appendix A ‘Technical data’
on page 69
3.
Check the shaft seal for leakages.
4.
Carry out a visual inspection of the pump unit at least once a month. ⮫ ‘How to visually inspect the pump unit:’ on page 61
5.
Check the operating data (total delivery pressure, delivery rate, viscosity, temperature, speed, power consumption,
etc.). ⮫ Appendix A ‘Technical data’ on page 69
6.
Check the set valve pressure. ⮫ Chapter 9.9 ‘Test the pressure relief valve’ on page 62
6.3 Check the suction-side pressure How to test the suction-side pressure:
Use the pressure sensor installed in the system to check the suction side pressure. Note the information in the Technical
data. ⮫ Appendix A ‘Technical data’ on page 69
6.4 Test the overflow valve How to check the overflow valve:
Check the system pressure using the overflow valve installed in the system. Note the information in the Technical data.
⮫ Appendix A ‘Technical data’ on page 69
6.5 Setting the aeration The damping of the noises can be set via the adjustable aeration if
necessary.
48
Screw pump L3MF IFOKSO-W
21.09.2023
6.2 Checking operation How to check the pump unit during operation:
1.
Make sure that the differential pressure is at least 1 - 1,5 bar.
2.
Check the pump unit for excessing power consumption, vibrations, increased temperature and leakages. ⮫ Further
information on page 61 🡆 The vibration level must not exceed 4.5 mm/s (rms) continuously or 7.1 mm/s (rms) during the transition states
(guide values).
🡆 The sound pressure level must not exceed the values in the “Technical data” chapter. ⮫ Appendix A ‘Technical data’
on page 69
3.
Check the shaft seal for leakages.
4.
Carry out a visual inspection of the pump unit at least once a month. ⮫ ‘How to visually inspect the pump unit:’ on page 61
5.
Check the operating data (total delivery pressure, delivery rate, viscosity, temperature, speed, power consumption,
etc.). ⮫ Appendix A ‘Technical data’ on page 69
6.
Check the set valve pressure. ⮫ Chapter 9.9 ‘Test the pressure relief valve’ on page 62
6.3 Check the suction-side pressure How to test the suction-side pressure:
Use the pressure sensor installed in the system to check the suction side pressure. Note the information in the Technical
data. ⮫ Appendix A ‘Technical data’ on page 69
6.4 Test the overflow valve How to check the overflow valve:
Check the system pressure using the overflow valve installed in the system. Note the information in the Technical data.
⮫ Appendix A ‘Technical data’ on page 69
6.5 Setting the aeration The damping of the noises can be set via the adjustable aeration if
necessary.
48
Screw pump L3MF IFOKSO-W
21.09.2023
자주 묻는 질문
Leistritz의 Leistritz L3Mf060 Pump에 관한 자주 묻는 질문입니다. Imtek Engineering은 United States에서 Leistritz의 Leistritz L3Mf060 Pump를 조달하는 데 도움을 드릴 준비가 되어 있습니다.
Imtek Engineering은 신뢰할 수 있는 공급 채널을 통해 정품 Leistritz 제품을 조달하여 United States 고객에게 경쟁력 있는 가격으로 제공합니다.
