2001년부터 산업용 부품 및 엔지니어링 솔루션.
독일에서 전 세계로 빠른 배송
다양한 결제 방법다양한 결제 옵션
Ringspann FBE 127 SFZG Complete Freewheel
기술 데이터시트 / 제품 문서
| 브랜드 |  |
| 카테고리 | 기타 |
| 제품명 | Ringspann FBE 127 SFZG Complete Freewheel |
| 제품 코드 | FBE 127 SFZG |
저희에게 연락하세요! 영업일 기준 24시간 이내(주말 및 공휴일 제외) 재고 상태와 예상 납기를 안내해 드립니다.
제품 설명
Ringspann의 Ringspann FBE 127 SFZG Complete Freewheel을(를) 포함한 제품은 병행 수입 채널을 통해 조달되며 United States의 고객에게 신속하고 안정적으로 배송됩니다. Imtek Engineering은 경쟁력 있는 가격으로 정품 Ringspann 부품을 제공합니다. Ringspann FBE 127 SFZG Complete Freewheel이 당사 웹사이트에 등록되어 있지 않더라도 언제든지 견적을 요청하실 수 있으며, 담당 팀이 신속히 답변 드릴 것입니다.
United StatesComplete Freewheels FBE with shaft coupling for small shaft misalignments
with sprags, available in three types Application as ➧ Overrunning Clutch
Features
42-1
Complete Freewheels FBE with flexible shaft coupling are sealed sprag freewheels with ball
bearings for coupling two aligned shafts. They are supplied oil-filled and ready for installation,
on customer request with biodegradable oil.
In addition to the standard type, two other types are available for extended service life.
Nominal torques up to 160 000 Nm.
Bores up to 300 mm. Many standard bores are available.
The material of the flexible coupling element is oil-resistant. We can provide you with performance data for the flexible shaft coupling upon
request.
Application example
Main drive
Freewheel 1
Freewheel 2 Auxiliary drive
42-2
Two Complete Freewheels FBE 72 with shaft coupling as an overrunning clutch in the
drive unit of a tube mill with additional auxiliary drive. A freewheel FBE 72 SF, standard
type (freewheel 1) is arranged between the main drive and the angular gear. However, a
freewheel FBE 72 LZ, type with sprag lift-off Z (freewheel 2) is arranged between the auxiliary
drive and the angular gear. If the gear motor is driving in the auxiliary power mode, freewheel
2 works in driving operation and freewheel 1 overruns at a low speed (freewheeling operation). When driving via the main motor, the
unit is driven via freewheel 1 (driving operation). Freewheel 2 overruns and automatically
disengages the auxiliary drive (freewheeling operation). With the high speed, the type with
sprag lift-off Z is used; the sprags work in freewheeling operation without contact and hence
are wear-free.
Mounting
Example for ordering
The shaft coupling including the fastening screws are supplied loose. Depending on the
desired freewheeling direction, the shaft coupling can be fitted on the right or the left of the
freewheel.
The tolerance of the shaft must be ISO h6 or j6.
Freewheel size FBE 107, standard type with 60 mm bore in the freewheel and 55 mm bore
in the shaft coupling:
• FBE 107 SF, d1 = 60 mm, d3 = 55 mm When ordering freewheel size FBE 340 and FBE
440, please also specify the freewheeling direction of the inner ring when viewed in direction
X:
• counter-clockwise free or
• clockwise free
42
with sprags, available in three types Application as ➧ Overrunning Clutch
Features
42-1
Complete Freewheels FBE with flexible shaft coupling are sealed sprag freewheels with ball
bearings for coupling two aligned shafts. They are supplied oil-filled and ready for installation,
on customer request with biodegradable oil.
In addition to the standard type, two other types are available for extended service life.
Nominal torques up to 160 000 Nm.
Bores up to 300 mm. Many standard bores are available.
The material of the flexible coupling element is oil-resistant. We can provide you with performance data for the flexible shaft coupling upon
request.
Application example
Main drive
Freewheel 1
Freewheel 2 Auxiliary drive
42-2
Two Complete Freewheels FBE 72 with shaft coupling as an overrunning clutch in the
drive unit of a tube mill with additional auxiliary drive. A freewheel FBE 72 SF, standard
type (freewheel 1) is arranged between the main drive and the angular gear. However, a
freewheel FBE 72 LZ, type with sprag lift-off Z (freewheel 2) is arranged between the auxiliary
drive and the angular gear. If the gear motor is driving in the auxiliary power mode, freewheel
2 works in driving operation and freewheel 1 overruns at a low speed (freewheeling operation). When driving via the main motor, the
unit is driven via freewheel 1 (driving operation). Freewheel 2 overruns and automatically
disengages the auxiliary drive (freewheeling operation). With the high speed, the type with
sprag lift-off Z is used; the sprags work in freewheeling operation without contact and hence
are wear-free.
Mounting
Example for ordering
The shaft coupling including the fastening screws are supplied loose. Depending on the
desired freewheeling direction, the shaft coupling can be fitted on the right or the left of the
freewheel.
The tolerance of the shaft must be ISO h6 or j6.
Freewheel size FBE 107, standard type with 60 mm bore in the freewheel and 55 mm bore
in the shaft coupling:
• FBE 107 SF, d1 = 60 mm, d3 = 55 mm When ordering freewheel size FBE 340 and FBE
440, please also specify the freewheeling direction of the inner ring when viewed in direction
X:
• counter-clockwise free or
• clockwise free
42
자주 묻는 질문
Ringspann의 Ringspann FBE 127 SFZG Complete Freewheel에 관한 자주 묻는 질문입니다. Imtek Engineering은 United States에서 Ringspann의 Ringspann FBE 127 SFZG Complete Freewheel를 조달하는 데 도움을 드릴 준비가 되어 있습니다.
Imtek Engineering은 신뢰할 수 있는 공급 채널을 통해 정품 Ringspann 제품을 조달하여 United States 고객에게 경쟁력 있는 가격으로 제공합니다.
