Industrial spare parts & engineering solutions since 2001.
독일에서 전 세계로 빠른 배송
다양한 결제 방법다양한 결제 옵션
Istec ISTSSYT104 Overspeed Detection System
저희에게 연락하세요! 영업일 기준 24시간 이내(주말 및 공휴일 제외) 재고 상태와 예상 납기를 안내해 드립니다.
제품 설명
Istec의 Istec ISTSSYT104 Overspeed Detection System을(를) 포함한 제품은 병행 수입 채널을 통해 조달되며 United States의 고객에게 신속하고 안정적으로 배송됩니다. Imtek Engineering은 경쟁력 있는 가격으로 정품 Istec 부품을 제공합니다. Istec ISTSSYT104 Overspeed Detection System이 당사 웹사이트에 등록되어 있지 않더라도 언제든지 견적을 요청하실 수 있으며, 담당 팀이 신속히 답변 드릴 것입니다.
United StatesDATASHEET SPEEDSYS OVERSPEED DETECTION SYSTEM (ODS)
SYSTEM Reaction time Measurement time (Tm)
Dependent on signal frequency and averaging, typically ± 2 ms
Hardware reaction time (Th)
Relays:
≤ 8 ms
Analog out:
≤ 100 ms
Relays, typical:
≤ 10 ms
Analog out, typical:
≤ 100 ms
Total reaction time (Th + Tm)
PC interface
USB-B mini for programming and status reading (Windows® 7 and higher proprietary software application)
Power supply input Number
2 redundant power supply inputs
Input voltage range
24 VDC (18 to 36 VDC)
Current consumption
SpeedSys 200: 210 mA @ 24 VDC SpeedSys 300: 220 mA @ 24 VDC
Reverse polarity protection Heat dissipation
Yes SpeedSys 200: maximum 5.0 W (@ 24 VDC) SpeedSys 300: maximum 5.3 W (@ 24 VDC)
Housing Material
Polyamide (PA 66 GF 30)
Dimensions
SpeedSys 200: 45.0 x 117.7 x 114.0 mm (1.77 x 4.63 x 4.49”) SpeedSys 300: 67.5 x 117.7 x 114.0 mm (2.66 x 4.63 x 4.49”)
Mounting assembly
DIN rail
Connectors
SpeedSys 200: 9 plug-in connectors with 4 contacts, screw type terminals
SpeedSys 300: 11 plug-in connectors with 4 contacts, screw type terminals
Connector clamping range
0.13 to 3.31 mm2 (26 to 14 AWG)
Connector tightening torque
0.4 to 0.6 Nm (0.30 to 0.44 lb-ft)
Weight
SpeedSys 200: ± 350 g (0.77 lb) SpeedSys 300: ± 425 g (0.94 lb)
Environmental conditions Operating temperature
-20 to 60 °C (-4 to 140 °F)
Storage temperature
-40 to 85 °C (-40 to 185 °F)
Operating humidity
5 to 80 % RH (non-condensing)
Storage humidity
5 to 85 % RH (non-condensing)
Ingress protection
IP20 according to IEC 60529 Indoor use or use in a protective enclosure
Other
Over voltage category II Pollution degree 2
DATASHEET SPEEDSYS ODS (OVERSPEED DETECTION SYSTEM)
VERSION 2.10 --- MAY 2024
5 / 7
SYSTEM Reaction time Measurement time (Tm)
Dependent on signal frequency and averaging, typically ± 2 ms
Hardware reaction time (Th)
Relays:
≤ 8 ms
Analog out:
≤ 100 ms
Relays, typical:
≤ 10 ms
Analog out, typical:
≤ 100 ms
Total reaction time (Th + Tm)
PC interface
USB-B mini for programming and status reading (Windows® 7 and higher proprietary software application)
Power supply input Number
2 redundant power supply inputs
Input voltage range
24 VDC (18 to 36 VDC)
Current consumption
SpeedSys 200: 210 mA @ 24 VDC SpeedSys 300: 220 mA @ 24 VDC
Reverse polarity protection Heat dissipation
Yes SpeedSys 200: maximum 5.0 W (@ 24 VDC) SpeedSys 300: maximum 5.3 W (@ 24 VDC)
Housing Material
Polyamide (PA 66 GF 30)
Dimensions
SpeedSys 200: 45.0 x 117.7 x 114.0 mm (1.77 x 4.63 x 4.49”) SpeedSys 300: 67.5 x 117.7 x 114.0 mm (2.66 x 4.63 x 4.49”)
Mounting assembly
DIN rail
Connectors
SpeedSys 200: 9 plug-in connectors with 4 contacts, screw type terminals
SpeedSys 300: 11 plug-in connectors with 4 contacts, screw type terminals
Connector clamping range
0.13 to 3.31 mm2 (26 to 14 AWG)
Connector tightening torque
0.4 to 0.6 Nm (0.30 to 0.44 lb-ft)
Weight
SpeedSys 200: ± 350 g (0.77 lb) SpeedSys 300: ± 425 g (0.94 lb)
Environmental conditions Operating temperature
-20 to 60 °C (-4 to 140 °F)
Storage temperature
-40 to 85 °C (-40 to 185 °F)
Operating humidity
5 to 80 % RH (non-condensing)
Storage humidity
5 to 85 % RH (non-condensing)
Ingress protection
IP20 according to IEC 60529 Indoor use or use in a protective enclosure
Other
Over voltage category II Pollution degree 2
DATASHEET SPEEDSYS ODS (OVERSPEED DETECTION SYSTEM)
VERSION 2.10 --- MAY 2024
5 / 7
자주 묻는 질문
Istec의 Istec ISTSSYT104 Overspeed Detection System에 관한 자주 묻는 질문입니다. Imtek Engineering은 United States에서 Istec의 Istec ISTSSYT104 Overspeed Detection System를 조달하는 데 도움을 드릴 준비가 되어 있습니다.
Imtek Engineering은 신뢰할 수 있는 공급 채널을 통해 정품 Istec 제품을 조달하여 United States 고객에게 경쟁력 있는 가격으로 제공합니다.
