Industrial spare parts & engineering solutions since 2001.
독일에서 전 세계로 빠른 배송
다양한 결제 방법다양한 결제 옵션
Istec SpeedSys T10 Tachometer
기술 데이터시트 / 제품 문서
저희에게 연락하세요! 영업일 기준 24시간 이내(주말 및 공휴일 제외) 재고 상태와 예상 납기를 안내해 드립니다.
제품 설명
Istec의 Istec SpeedSys T10 Tachometer을(를) 포함한 제품은 병행 수입 채널을 통해 조달되며 United States의 고객에게 신속하고 안정적으로 배송됩니다. Imtek Engineering은 경쟁력 있는 가격으로 정품 Istec 부품을 제공합니다. Istec SpeedSys T10 Tachometer이 당사 웹사이트에 등록되어 있지 않더라도 언제든지 견적을 요청하실 수 있으며, 담당 팀이 신속히 답변 드릴 것입니다.
United StatesDATASHEET SPEEDSYS TACHOMETER SERIES – Speed transmitters, monitors & switches
SYSTEM FEATURES Reaction time Speed measurement time (Tm)
Dependent on selected measurement time. (2 – 1000 ms, 10 ms default)
Hardware reaction time (Th)
Relays:
≤ 4 ms
Analog out:
≤ 100 ms
Relays, typical:
≤ 6 ms @ Tm = 2 ms
Total reaction time (Th + Tm)
≤ 14 ms @ Tm = 10 ms (default) Analog out, typical:
PC interface
≤ 100 ms
TCP/IP programming and status reading (Windows® 10 and higher proprietary software application)
Modbus interface
Modbus TCP
Power supply input Input voltage range
24 VDC (18 VDC – 31,2 VDC)
Current consumption
T10 – max 160 mA T20 – max 320 mA (max 160 mA / channel) T30 – max 480 mA (max 160 mA / channel)
Reverse polarity protection Heat dissipation
Yes T10 – max 4 W T20 – max 8 W T30 – max 12 W
Housing Material
Polyamide (PA 66 GF 30)
Dimensions
T10 – 22,5 x 117 x 114 mm (0.89 x 4.61 x 4.49”) T20 – 45,0 x 117 x 114 mm (1.78 x 4.61 x 4.49”)
T30 – 67.5 x 117 x 114 mm (2.67 x 4.61 x 4.49”)
Weight
T10 – 240 g T20 – 324 g T30 – 414 g
Mounting assembly
DIN rail
Connectors
Push-in type terminals
Environmental conditions Operating temperature
-20 to 60 °C (-4 to 140 °F)
Storage temperature
-40 to 85 °C (-40 to 185 °F)
Operating & storage humidity
75% averaged over the year; up to 90% for max 30 days. Condensation to be
avoided.
Ingress protection
IP20 according to IEC 60529 Indoor use or use in a protective enclosure
Other
Overvoltage category II Pollution degree 2
DATASHEET SPEEDSYS ® TACHOMETERS
VERSION 1.10 --- MAY 2024
4 / 6
SYSTEM FEATURES Reaction time Speed measurement time (Tm)
Dependent on selected measurement time. (2 – 1000 ms, 10 ms default)
Hardware reaction time (Th)
Relays:
≤ 4 ms
Analog out:
≤ 100 ms
Relays, typical:
≤ 6 ms @ Tm = 2 ms
Total reaction time (Th + Tm)
≤ 14 ms @ Tm = 10 ms (default) Analog out, typical:
PC interface
≤ 100 ms
TCP/IP programming and status reading (Windows® 10 and higher proprietary software application)
Modbus interface
Modbus TCP
Power supply input Input voltage range
24 VDC (18 VDC – 31,2 VDC)
Current consumption
T10 – max 160 mA T20 – max 320 mA (max 160 mA / channel) T30 – max 480 mA (max 160 mA / channel)
Reverse polarity protection Heat dissipation
Yes T10 – max 4 W T20 – max 8 W T30 – max 12 W
Housing Material
Polyamide (PA 66 GF 30)
Dimensions
T10 – 22,5 x 117 x 114 mm (0.89 x 4.61 x 4.49”) T20 – 45,0 x 117 x 114 mm (1.78 x 4.61 x 4.49”)
T30 – 67.5 x 117 x 114 mm (2.67 x 4.61 x 4.49”)
Weight
T10 – 240 g T20 – 324 g T30 – 414 g
Mounting assembly
DIN rail
Connectors
Push-in type terminals
Environmental conditions Operating temperature
-20 to 60 °C (-4 to 140 °F)
Storage temperature
-40 to 85 °C (-40 to 185 °F)
Operating & storage humidity
75% averaged over the year; up to 90% for max 30 days. Condensation to be
avoided.
Ingress protection
IP20 according to IEC 60529 Indoor use or use in a protective enclosure
Other
Overvoltage category II Pollution degree 2
DATASHEET SPEEDSYS ® TACHOMETERS
VERSION 1.10 --- MAY 2024
4 / 6
자주 묻는 질문
Istec의 Istec SpeedSys T10 Tachometer에 관한 자주 묻는 질문입니다. Imtek Engineering은 United States에서 Istec의 Istec SpeedSys T10 Tachometer를 조달하는 데 도움을 드릴 준비가 되어 있습니다.
Imtek Engineering은 신뢰할 수 있는 공급 채널을 통해 정품 Istec 제품을 조달하여 United States 고객에게 경쟁력 있는 가격으로 제공합니다.
