Mts Sensor MHRM Mobile Hydraulic Position Sensor

Mts Sensor

Product Code: MHRM
Brand: Mts Sensor



GET OFFER: info@imtek.com.tr

Description for Mts Sensor MHRM Mobile Hydraulic Position Sensor

OutputSignal characteristic Analog output restricted by noise or A/D converter of control unitVoltage 0.25…4.75 VDC; 0.5…4.5 VDC; 0.25…9.75 VDC; 4.75…0.25 VDC; 4.5…0.5 VDC; 9.75…0.25 VDCCurrent 4…20 mA; 20…4 mAMeasured value PositionMeasurement parametersResolution ±0.1 mm typicalLinearity 0050…0250 mm 0255…2000 mm 2005…2500 mm? ±0.1 mm ±0.04 % (F.S.) ? ±0.8 mmHysteresis ? ±0.2 mmSetpoint tolerance ±2 mmOperating conditionsOperating temperature ?40…+105 °CStorage temperature ?25…+65 °CHumidity 90 % relative humidity, no condensationIngress protection – M12 connector IP67 / IP69K (correctly fitted)Ingress protection – Sensor housing IP67Shock test (according to EN 50155) According to EN 61373 Cat2 (Bogie) and Cat3 (Axle)Vibration test (according to EN 50155) According to IEC 60068-2-64-Fn Cat3 (Axle)EMC test (according to EN 50155) EN 50121-3-2ISO 14982 Agricultural and forest machinesEN 13309 Construction machinesISO 16750-2Electromagnetic immunity according to EN 61000-6-2Electromagnetic emission according to EN 61000-6-3RF immunity 200 V/m per ISO 11452-2/-4PCB coating According to EN 50155Pressure (according to DIN EN ISO 19879)* Ø 7 mm sensor rod Ø 10 mm sensor rodPN (nominal operating) 300 bar 350 barPmax (max. overload) 400 bar 450 barPstatic (proof pressure) 525 bar 625 barDesign / MaterialHousing lid Compound PBT (glass fiber reinforced plastic); sealing ring: TPUSealing O-ring NBR with back-up ring PTFESensor electronics housing Stainless steel 1.4305 (AISI 303)Sensor rod – Ø 7 mm Stainless steel 1.4301 (AISI 304)Sensor rod – Ø 10 mm Stainless steel 1.4306 (AISI 304L)Stroke length 50…2500 mmMechanical mountingMounting instruction Please consult the technical drawingsMounting position AnyElectrical installationConnector InterConnection plugOperating voltage 12 / 24 VDC (8…32 VDC)24 VDC supply 12 VDC supplyLoad (output mA) RL ? 500 ? RL ? 250 ?Load (output VDC) RL ? 10 k? RL ? 10 k?Inrush current 4.5 A / 2 ms 2.5 A / 2 msOperating voltage ripple 1 %PPPower drain ? 1 WOver voltage protection (VDC-GND) Up to +36 VDCPolarity protection (GND-VDC) Up to ?36 VDCInsulation resistance R ? 10 M? @ 60 sec according to EN 50155Dielectric strength 708 VDC (DC ground to machine ground) according to EN 50155MHRM EMBEDDED – TECHNICAL DATA*/ According to calculations under use of the FKM guidelineCycles Ø 7 mm sensor rod Ø 10 mm sensor rodDynamic pressure: < 2 × 106 pressure cycles 300 bar 350 barStatic pressure: < 2 × 104A pressure cycles 400 bar 450 barProof pressure: Maximum 5 minutes testing time for cylinder pressure test 525 bar 625 bar

Recommended Products For Mts Sensor