im-tek.com

Olaer VG3 400 1 TS2 1 Charging Set

Olaer

Product Code: VG3 400 1 TS2 1 Hydrolic Filling Apparatus
Brand: Olaer



GET OFFER: info@imtek.com.tr

Description for Olaer VG3 400 1 TS2 1 Charging Set

Tester and pressuriser VG U, VG R and Pressure regulatorsThe universal VG U and VG R tester and pressuriser unit is indispensible for checking, charging and draining the most commonly used hydraulic accumulators available on the market.It is screwed to the pressurizing valve on the accumulator and connected to the nitrogen source using a high-pressure hose that is fitted with a pressure-reducing valve, e.g. from our DRV range.If the nitrogen only needs to be monitored or reduced, no hose is required.Charging Set VG3The charging set VG3 is an indispensable instrument for the verification, pressurization and nitrogen bleeding of the hydraulic accumulators. The standard set is delivered in a storage case containing the following:•  pressure gauge with standardized graduations in bar•  vent valve•  3 connection adapters for charging valves. (7/8’’ – 5/8’’ - 8V1).•  High pressure hose, 2.5 m length, in standard, maximum working pressure 400 Bar. This hose is fitted at each end with a female swivel coupling G ¼’’BSP for connecting to the inflation port. It can be connected to a commercial nitrogen bottles, in this case add an adapter on one end view model in the country. For the other destinations consult Parker Olaer.•  Operating instruction french/english versionNote: On request, the following options are available :•  Pressure gauge with different scale divisions : 63 mm with glycerol bath back end G1/4’’ BSP equipped with direct gear for minimess ®connection. To scale divisions 0-10,0-60,0-100,0-400, with accuracy class 1.6%.•  High pressure hose of different length with adapters for nitrogen bottles from various countries are available (specify country)Maximum working pressure: limited by the maximum operating pressure of the installed hydraulic system, pressure limited to 400 bar in any case.

Recommended Products For Olaer


Olaer EHV 2,5-350/90 01125 Accumulator 2.5 L Bladder Kit
Olaer EHV 20-330/90-A25GB Bladder Accumulator
Olaer Ehv 24.5-330/90 Accumultor
Olaer B10T-40 Exchanger
Olaer EHVF50-330/90 Valve Nut
Olaer ELV 0,14-100/00-X25X-G100 Bladder Accumulator – Orell
Olaer KIT EHV 2.5-350 D16 Bladder
Olaer EHV 32-330/90 1125 Bladder Accumulator
Olaer VG3/250 Charging Set
Olaer BSP EHV 32-330/90-01125 Fluid Port Assembly
Olaer 40505-C98 Bonded Seal
Olaer EHV 2.5-350/90-A25DC-200 Accumulator
Olaer 108495-01125 Diaphragm Accumulator
Olaer IHV 10-250/330 Bladder
Olaer 400308-S Seal Set For Actuator
Olaer EBV 10-40/90-A25LA-200 Accumulator
Olaer EHV 1 - 350/00 Bladder Accumulator
Olaer KIT EBV 100-40 D372 compound compound “NBR20” Bladder Kit
Brinkmann SAL2002 / 420 Sludge submersible pump
Goyen CA76MM040-305 Dust Collector Valve
Vogel MKU5-13BE00000 428 Single Line Pump
MBS MLW 139 4 34 1 2000 Sanitary Mixflo Multitube
Loreme CAL4/100IG2 Signal Duplicator
Grundfos NK 40-315/318 AA1F2AESBAQESW1 Pump
Topworx 7H-23567A2 - DPDT, End Sensing, CSA GP, 36Inch Lead Wires, 316 Stainless Steel, Model 7H GO Switch
Tokimec THPCG Pilot Operated Check Valves
Meggitt CA280 144-280-000-016 Piezoelectric Accelerometer
Atlas Copco 2901161600 Repair Kit
Dropsa 675102 Modular Distributor
Kelvion DS 6 Fully Welded Plate Heat Exchanger
Goyen CA45DD Repair Kit
Olaer Ehv 5-350/90-A25DC-200 Accumulator
Gemü Gemü R690 25D 7 1142EDN Diaphragm Valve
Gorter Controls 2” R 286SV-2 150 Repair Kit
HEIDENHAIN AccurET Modular 48 Angle Encoder Module
Heidenhain ECN 1313 2048 62S12-78 K 0,00 .. 65B06 40 01 .. .. D EnDat01 37 01 ..ID:-Nr.768295-19 Rotary Encoder With İntegral Bearing
Mahle Pi 5208 PS vst 6 77943541 Duplex Filter
Scherzinger 4040-710-B-DM-75-2 Hastelloy (R) Gear Pumps 4040
Negele VTR-2 Temperature Controller
Winsmith E24MDSPB2160H0 Housing Mount Universal (Quill)
Mts Sensor MHRM Mobile Hydraulic Position Sensor
Eaton PVQ20B2RSS1S21C21D12 Hydraulic Pump