Industrial spare parts & engineering solutions since 2001.
- Products
- Spirax Sarco
- Pump
- Spirax Sarco MFP 14 Automatic Pump
Spirax Sarco MFP 14 Automatic Pump
Technical Datasheets / Product Documentations
| Brand |  |
| Category | Pump |
| Product Name | Spirax Sarco MFP 14 Automatic Pump |
| Product Code | MFP 14 |
Contact with us! 24 business hours (excluding weekends and holidays) to confirm stock status and estimated delivery time.
Product Description
Spirax Sarco products, including Spirax Sarco MFP 14 Automatic Pump, are sourced through parallel import channels and delivered to our customers worldwide with speed and reliability. As an authorized trading partner, Imtek Engineering offers genuine Spirax Sarco parts at competitive prices. Even if Spirax Sarco MFP 14 Automatic Pump is not listed on our website, you are welcome to request a price quote — our team will respond promptly with a tailored offer.
Temperature °C
Pressure/temperature limits B
C
A
Steam saturation curve D A - D Flanged PN16 Pressure bar g
B - D Flanged JIS/KS 10 C - D Flanged ANSI 150
MFP14S
Temperature °C
AC B
Steam saturation curve D Pressure bar g
Superheated steam should not exceed the following parameters: 13.8 bar g @ 198 °C
The product must not be used in this region.
For use in this region contact Spirax Sarco - As standard this product should not be used in this region or beyond its operating
range.
Body design conditions
PN16 MFP14
MFP14S
13.8 bar g
13.8 bar g
16 bar g @ 120 °C
16 bar g @ 120 °C
300 °C @ 12.8 bar g
300 °C @ 10.8 bar g
Maximum motive inlet pressure (steam air or gas) PMA
Maximum allowable pressure
TMA
Maximum allowable temperature
0 °C
Minimum allowable temperature. For lower temperatures consult Spirax Sarco
PMO
Maximum operating pressure for saturated and superheated steam service
13.8 bar g @ 198 °C
13.8 bar g @ 198 °C
TMO
Maximum operating temperature for saturated and superheated steam service
198 °C @ 13.8 bar g
198 °C @ 13.8 bar g
Product is safe for use under full vacuum conditions Total lift or backpressure (static head plus pressure in the return system) must be below the motive fluid inlet pressure to
allow capacity to be achieved:Height (H) in metres x 0.0981 plus pressure (bar g) in return line, plus downstream piping friction pressure drop in bar calculated at a
flowrate of the lesser of six times the actual condensate rate or 30 000 litres/h.
Recommended filling head above the pump
0.3 m
Minimum filling head required
0.15 m (reduced capacity)
Standard pump operates with liquids of specific gravity:
Pump discharge per cycle Steam consumption Air consumption (Free air) Temperature limits (Ambient )
1 down to 0.8 DN80 x 50
DN50
DN40 and DN25
19.3 litres
12.8 litres
7 litres
20 kg/h maximum
20 kg/h maximum
16 kg/h maximum
5.6 dm /s maximum
5.6 dm /s maximum
4.4 dm 3 /s maximum
-10 °C to 200 °C
-10 °C to 200 °C
-10 °C to 200 °C
3
3
The MFP14SS Pressure/temperature limits are shown on the next page
TI-P136-02
CMGT Issue 17
Page 5 of 11
MFP14, MFP14S and MFP14SS Automatic Pumps
Frequently Asked Questions
Frequently asked questions about Spirax Sarco MFP 14 Automatic Pump by Spirax Sarco. Imtek Engineering is ready to assist you in sourcing Spirax Sarco MFP 14 Automatic Pump from Spirax Sarco in United States.
United StatesImtek Engineering sources genuine Spirax Sarco products through trusted supply channels and supplies them to customers in United States at competitive prices.
