Industrial spare parts & engineering solutions since 2001.
Stahl 220322 Module
Technical Datasheets / Product Documentations
| Brand |  |
| Category | Module |
| Product Name | Stahl 220322 Module |
| Product Code | 220322 |
Contact with us! 24 business hours (excluding weekends and holidays) to confirm stock status and estimated delivery time.
Product Description
Stahl products, including Stahl 220322 Module, are sourced through parallel import channels and delivered to our customers worldwide with speed and reliability. As an authorized trading partner, Imtek Engineering offers genuine Stahl parts at competitive prices. Even if Stahl 220322 Module is not listed on our website, you are welcome to request a price quote — our team will respond promptly with a tailored offer.
Input Max. input current, mA sources
50 mA
Input for open-circuit voltage Ua
≤ 26 V
Short-circuit current
≤ 35 mA
Supply voltage for transmitter
≥ 16 V at 20 mA
Input resistance
≤ 100 ohm
Output Output
0/4 to 20 mA with HART
Output signal
0/4 to 20 mA with HART
Function range output
0 – 24 mA
Output A
0/4 to 20 mA
Output B
0/4 to 20 mA
Behaviour of the output
= input signal
Output current at Ie=0
0 mA
Output residual ripple
≤ 40 µAeff
Load resistance RL
0 ... 600 Ω (terminal 1+/2- r esp. 5+/6-) 0 ... 379 Ω (terminal 3+/2- r esp. 4+/6-)
(With internal 221 ohm resistor for HART)
Settling time 10-90%
≤ 100 µs
LF switch user adjustment
Activated/deactivated
Wire breakage error detection input
< 3.6 mA
Short circuit error detection input
> 20.5 mA
Wire break. err detection OFF
< 3,6 mA
Line fault indication
Red "LF" LED; per channel
Fault message contact switching capacity
30 V / 100 mA
Line fault and loss of power signalization
-C ontact (30 V/100 mA), closed against earth in case of error
- pac-Bus, potential-free contact (30 V/100 mA)
Deviations / error note
Information in % of the measuring range (20 mA) at UN, 23 °C
Deviation
≤ 0,1 %
Temperature influence error limits
≤ 0.05% / 10 K
Device Specific Data
LED operating conditions
LED "PWR", green
Ambient Conditions Ambient temperature °C
-20 °C ... 70 °C (Single device) -20 °C ... 60 °C (Group assembly)
Ambient temperature °F
-4 °F ... +158 °F (Single device) -4 °F ... +140 °F (Group assembly)
Note
The installation conditions affect the ambient temperature.
Observe the "Cabinet installation guide".
Storage temperature °C
-40 °C ... 80 °C
Storage temperature °F
-40 °F ... +176 °F
Max. relative humidity
95%
Use at the height of
< 2000 m
Max. operating altitude
2000 m
Electromagnetic compatibility
Tested to the following standards and regulations: EN 61326-1 For use in industrial areas;
NAMUR NE 21
2026-03-21 R. STAHL, INC. | 13259 N. Promenade Blvd. | Stafford, TX 77477 | Tel. +1 800 782 4357
V 0.201 US Email US: [email protected] | Email CAN: [email protected] | rstahl.com
4/7
Frequently Asked Questions
Frequently asked questions about Stahl 220322 Module by Stahl. Imtek Engineering is ready to assist you in sourcing Stahl 220322 Module from Stahl in United States.
United StatesImtek Engineering sources genuine Stahl products through trusted supply channels and supplies them to customers in United States at competitive prices.
