Tecsis F6212 Ring Force Transducer

Tecsis

Product Code: F6212
Brand: Tecsis



GET OFFER: info@imtek.com.tr

Description for Tecsis F6212 Ring Force Transducer

Applications Cutting tools Measurement and inspection equipment Test benches and production lines Press-in forces and joining forces monitoring Force measurement on spindle drives and press spindles Special features Measuring ranges 0 ... 2 kN up to 0 ... 100 kN For compression force measurements Flat dimensions Stainless steel measuring body Protection class IP65 Description Ring force transducers are designed for static measurement tasks in the direct flux of force. They determine the tension and compression forces in a wide scope of applications. These force transducers are used in applications and test facilities with the need of a ring geometry with a big inner diameter. Typical tasks are force measurement in spindle drives or presses. NoteIn order to avoid overloading, it is advantageous to connect the force transducer electrically during installation and to monitor the measured value. The force to be measured must be applied axially rightangled of the force transducer and free of transverse force. Optionally, this ring force transducer is available on the upper and lower side with fastening threads. When mounting the force transducer, a flat, ground and hard surface should be ensured. Options Control function 100 % signal Rated output adjustment on 1 mV/V Extended nominal temperature range

Recommended Products For Tecsis