Magnetic Field SensorFor Pneumatic CylindersOrder number: 4685742For T-groove cylinders without mounting accessoriesOptional accessories for mounting on other cylindrical housings.One-hand mounting possibleFine adjustment tool and stopper directly mountable on the sensorStable mountingMagneto-resistive sensorDC 3-wire, 10…30 VDCNO contact, PNP outputPigtail with male end, Ø 8 mmType BIM-UNT-AP7X-0.3-PSG3S
Ident. no. 4685742
Pass speed ? 10 m/s
Repeatability ? ± 0.1 mm
Temperature drift ? 0.1 mm
Hysteresis ? 1 mm
Ambient temperature -25…+70  °C
Operating voltage 10…30  VDC
Residual ripple ? 10 % Uss
DC rated operational current ? 100 mA
No-load current ? 10 mA
Residual current ? 0.1 mA
Isolation test voltage ? 0.5 kV
Short-circuit protection no
Voltage drop at Ie ? 1.4 V
Wire breakage/Reverse polarity protection yes / yes (voltage supply)
Output function 3-wire, NO contact, PNP
Switching frequency 1 kHz
Design Rectangular, UNT
Dimensions 28 x 5 x 6  mm
Housing material Plastic, PP
Active area material Plastic, PP
Tightening torque fixing screw 0.4 Nm
Electrical connection Cable with connector, Ø 8 mm
Cable quality Ø 3  mm, Gray, Lif9Y-11Y, PUR, 0.3  m
Suited for E-ChainSystems® acc. to manufacturers declaration H1063M
Core cross-section 3 x 0.14  mm2 Vibration resistance 55 Hz (1 mm)
Shock resistance 30 g (11 ms)
Protection class IP67
MTTF 2283  years acc. to SN 29500 (Ed. 99) 40 °C
Mounting on the following profiles
Cylindrical design ENKF
Switching state LED, Yellow
Included in delivery cable clip