Performance parameter
range for our platform construction method:
Output: 0.15
kW to 150 kW
Voltage: 110 V to 440 V
Speed: 500 min-1 to 3.600 min-1
Protection class: IP 44 to IP 55
Characteristics of our standard DC
motors
Firmly installed connection
pieces inside the terminal box
Oversized terminal box allows
also higher currents
Flexible combination of NEMA
MG1 and EN 60034ff possible
Torque up to a threefold
overload capacity
Insulation class H rise F
Vibration severity B guarantees
a high endurance of the motor and a high lifetime of the bearings
Adjustment and optimisation of
the motor parameter to the pump curve
Start-up time optimisation by
means of the configuration of a NEMA starting resistor which is especially
matched to the motor
DC motors from WINKELMANN
Direct current motors
with protection class ratings from IP 44 to IP 55 are
especially suited for use in damp, extremely dirty or aggressive environments
where a high level of protection is necessary.
Cooling can take place
according to engine speed by means of self-cooling on the surface or
independently of engine speed by a forced ventilation fan. Depending on the
specific use, the drives can be equipped with brake, engine speed sensor or
gearbox as well as various monitoring devices. We realize for internal and
external installations.
Motors according to NEMA MG1
Due to the increasing
globalisation, it has become more and more important for us and our customers
to serve not only the European, but also the worldwide markets - of course in
consideration of the local requirements and standards. For this reason we have
supplemented our product portfolio by Motors acc. to NEMA MG1. Our many years
of experience with the requirements of IEC and DIN EN Standards are the basis
of this product series. Our modular design allows us a cost-effective
combination of these two Standards.
WINKELMANN
Elektromotoren is your holistic system provider for the development and
manufacture of three-phase and DC motors. Customised assembly and manufacture.
In line with your requirements and incorporating our know-how.
Let us advise you on an individual basis - we look forward to hearing from
you.
Sample applications
Extruder
Transmission/engine test rigs
in the automotive industry
Fluid flow test rigs in the
field of inspection and research
Braking motors
Standby drives
Traversing devices with a high
protection class
Rail drive units
Compressor drive units for the
oil and gas industry
