Application Globe valves (V46) are industrial valves
designed to open or close the service fluid flow fully. Control (V40) valves
are used to regulate flowing fluid. Both types are used especially in power
engineering, chemical industry as well as other industries putting great
demands on functionality at high pressures and high temperatures. Working
medium water steam gas other fluids seawater Technical description The valve
has a one-piece body which can be a forged or a cast depending on nominal size
and nominal pressure. The yoke-type bonnet is also cast or forged and is
connected with the body by means of a bolted or flanged joint. The seat and the
disc are hard faced. The disc is made as either a plug type disc (valves V46)
or a regulating disc (valves V40). Valves with regulating disc have a linear
regulating characteristic. Tightness is achieved by means of special graphite
gaskets and packing rings. Tightness of the stem of valve type V46.6 is
achieved by a bellow. The valves are designed so as to be earthquake resistant.
Operation manual (hand wheel, chain wheel) electric actuator pneumatic
actuator, hydraulic actuator actuator located out of the valve Globe valves can
be equipped with a locking device. Position indicator on request. Operation is
dimensioned for the working parameters acc. to EN 13709.