Fully automatic crude oil distillation system, processor controlled according to ASTM D-1160 for the determination of boiling ranges of crude oil products under vacuum. The system can be operated in strict accordance to the ASTM procedure with 1 single receiver or alternatively, by using the automatic fraction collector, with 4 receivers.
Key Features
Parameter input, display as well as calculation of distillation and final data and print out of the distillation curve via PC
Easy operation due to userfriendly software, operated under WINDOWS XP
Sophisticated safety system
Automatic heating and distillation rate as well as detection of initial boiling point (ibp)
Individual distillation reports and curves can be re-called any time
Precise distillation data due to automatic calibration of volume measuring system
Anti foaming by foam breaker
Precise vacuum control
Automatic washing run
Calculation of charge according to receiver temperature and charge density
Easy installation effort as the system is delivered ready for operation
Manual override of automatic operation
Automatic controlled termination of distillation process and start of cooling
automatic fraction collector with 4 receivers (Petrodist 300CC-F)
The distillation is fully automatic from the initial boiling point to the pre-selected end boiling point or detected break-off. The criteria for break-off are:
The pre-selected final AET (atmospheric equivalent temperature) is reached
The maximum bath temperature is reached
The maximum flask temperature is reached
The pre-selected distillate volume is reached
The flask insert cracks
The distillate pressure drops
Product lack in the flask
The distillation volume is measured automatically in receivers, temperature controlled by an IR-heater. The yield is calculated in percentage to the charge quantity. Distillation report, final data and distillation curve are printed out.
There are manual, semi-automatic and full-atomatic models of Petrodist 300 Series. Fractional collecter is provided with 300CC-F model.
