§  Technology:oval gear§  Fluid:for liquids§  Other characteristics:in-line§  Process pressure:Max.: 40 bar (580.15 psi)Min.: 10 bar (145.04 psi)§  Process temperature:Max.: 180 °C (356 °F)Min.: -40 °C (-40 °F)§  Volumetric flow rate:Max.: 1,200 l/min (317 us gal/min)Min.: 5 l/min (1.3 us gal/min) 



































The control of the quantities of industrial liquids is an economic
necessity considering the high value of these products. The volume measuring
instruments required for this must be adjusted to the particular operating
conditions and the characteristics of the materials to be measured both with
respect to design and the materials used for these instruments.



Oval Wheel Meters of the OI series meet all
of these requirements. They are used for the measurement of liquid intermediate
and finished products such as liquefied gases, acids, alkaline solutions, fats,
alcohols, solvents, dispersions, polymers, polycondensates, paints, colours and
adhesives etc.



Special emphasis should be placed on the
capability to measure liquids with very high viscosities (up to 1.000.000
mPa·s) but with low pressure loss.



The OI series of oval wheel meters assures a
high degree of quality fort he products being manufactured due to the high
measuring accuracy of the flow meters.