Product Name: Tecsis EGS08 Limit Switch
Brand: Tecsis
Product Code: EGS08
Tags: Tecsis
EGS08 Limit
Tecsis EGS08 Limit
Switch
Switch
Tecsis Limit Switch
Limit Switch
Tecsis EGS08 Limit
EGS08 Switch
Limit Switch
Tecsis Limit
Tecsis EGS08 Switch
Tecsis Switch
Tecsis EGS08 Limit Switch
EGS08 Limit
Limit Switch
您对制造商Tecsis的产品Tecsis EGS08 Limit Switch，代码为EGS08感兴趣吗？立即联系我们获取报价。Imtek Engineering，世界上最快最可靠的工业设备供应商，将为您提供最佳报价！
Get Offer With E-Mail: info@im-tek.com
Get a offer for Tecsis EGS08 Limit Switch from our live support team now!
The limit switch EGS08 allows to control 3 limit values via 3 relays. Load cells with an outputsignal range of 4...20mA can be connected to it. The housing is prepared for top hat rail mounting.FeaturesAnalog limit switch for top hat rail mounting For sensors with 4...20mA output 2-/3-wiretecsis force transducers with SIL3-relay connectable3 potential free relay contacts (closing contacts) with status LED Accuracy 0,3% of the full scalePotentiometer allows easy adjusting of the limit valuesCable break and loose rope recognitionSensor supply 21 VDC, max. 50 mANeeded supply energy 24 VAC or VDCUser-friendly and easy to maintain because of big screw type terminalsCompact designFilter settings selectable through solder bridgesProtection class IP 40ApplicationIn combination with load cells or force transducers the limit switch EGS08 is utilized in weighing and load control in hoisting devices, cranes and more. Connectable are force transducer or load cells with an output signal of 4...20 mA in 2- or 3-wire design. By changing a solder bridge an input range of 1...9 mA can be choosen. The internal sensor supply is 21 VDC with max 50 mA. Usually the switch is not pre-adjusted and the customer connects it to the force transducer and also adjusts it. The adjustment of the level of the 3 limit values, which correlates to a certain load of the connected strain gauges, is done by a potentiometer. When turned off or not supplied with power the three relay contacts drop off. If one of the sensors is broken or not connected all relays switch to the state of overload. A status LED for each relay illuminates as long as the contact is closed. The limit switch is designed for top hat rail mounting in a switch cabinet. The robust full housing also allows stand-alone mounting.