Produktname: Apv SI2 Safety Valve
Marke: Apv
Produktcode: SI2
Stichwörter: Apv
SI2 Valve
Apv SI2
Apv SI2 Valve
Apv SI2 Valve
Safety Valve
SI2 Safety
SI2 Valve
Apv SI2 Safety
Apv SI2
Apv SI2 Safety Valve
Apv Valve
Apv Safety
SI2 Safety Valve
Safety Valve
Safety
SI2 Safety
Apv Safety Valve
Safety Valve
Interessieren Sie sich für das Produkt Apv SI2 Safety Valve vom Hersteller Apv mit dem Code SI2? Kontaktieren Sie uns jetzt und holen Sie sich ein Angebot. Imtek Engineering, der schnellste und zuverlässigste Lieferant von Industrieausrüstung der Welt, wird Ihnen das beste Angebot machen!
Angebot per E-Mail erhalten: info@im-tek.com
Holen Sie sich jetzt ein Angebot für Apv SI2 Safety Valve von unserem Live-Support-Team!
The spring-loaded, full stroke safety valves DELTA SI 2 are approved for fluids and gases. They are used where containers or tanks have to be secured against excess pressure. As a result of their hygienic design they are especially suitable for use in brewing and drinks technology, the dairy industry, the food industry, the chemical and pharmaceutical industries. Main advantages Hygienic designIdeally suited to CIP applicationsAll product-contact parts finished to Ra <= 0.8µPneumatic or manual operationThe pneumatic seat lifting device includes the facility for feedback signals from proximity switchQuick and easy seal replacementThe nameplate details uniquely identify each valveThe new safety valves DELTA SI 2, are approved by the TÜV, for fluids and gases, they meet the requirements of the Pressure Vessels codes, AD-leaflet A2 and the VdTÜV leaflet Safety Valve 100. This means that the valve design prevents the permitted operational pressure being exceeded by more than 10%. If the minimum set pressure after opening falls short by a maximum of 10% in the case of gases and a maximum of 20% in the case of fluids, the valve closes. Safety valves DELTA SI 2 can be supplied in nominal diameters of DN 25 to 100. The valves are manufactured in stainless chrome nickel steel, all product-contact parts are made of material 1.4571. The housing is in accordance with AD leaflet A4 and TRB 801 No. 45.Safety valves are supplied with flanges with a 3.1.B certificate. The standard material of the seals is EPDM. Alternatively silicon and FPM are available. An FDA and a BGA licence is available for EPDM and silicon.The safety valves DELTA SI 2 may be fitted with manual or pneumatic controls.Valves can be supplied with manual or pneumatic seat lifting device. A proximity switch and valve position indicator may be incorporated.The valve may be cleaned up to the valve stem via a CIP nozzle, supplied as an optional accessory, this is fitted in a pipe adapter below the valve.