Produktname: Friedrich FWO 50-2-3.4 Stoneware Vibrator Motor FW-Type
Marke: Friedrich
Produktcode: FWO 50-2-3.4
Stichwörter: Friedrich
Friedrich Motor FW-Type
Friedrich 50-2-3.4 Vibrator FW-Type
FWO Stoneware Vibrator Motor
FWO Stoneware FW-Type
FWO Vibrator Motor FW-Type
Friedrich 50-2-3.4 Vibrator Motor
Friedrich 50-2-3.4 Vibrator Motor FW-Type
50-2-3.4 Stoneware Motor
FWO 50-2-3.4
Stoneware Vibrator Motor FW-Type
Friedrich FWO Motor FW-Type
Friedrich 50-2-3.4 FW-Type
Stoneware Vibrator FW-Type
Friedrich FWO Stoneware Vibrator FW-Type
Friedrich Vibrator
Friedrich FWO 50-2-3.4
FWO 50-2-3.4 Stoneware Motor FW-Type
Friedrich Motor
Friedrich FWO 50-2-3.4 Stoneware Vibrator FW-Type
Stoneware Vibrator Motor FW-Type
Interessieren Sie sich für das Produkt Friedrich FWO 50-2-3.4 Stoneware Vibrator Motor FW-Type vom Hersteller Friedrich mit dem Code FWO 50-2-3.4? Kontaktieren Sie uns jetzt und holen Sie sich ein Angebot. Imtek Engineering, der schnellste und zuverlässigste Lieferant von Industrieausrüstung der Welt, wird Ihnen das beste Angebot machen!
Angebot per E-Mail erhalten: info@im-tek.com
Holen Sie sich jetzt ein Angebot für Friedrich FWO 50-2-3.4 Stoneware Vibrator Motor FW-Type von unserem Live-Support-Team!
General specificationsStock:The built-in special cylindrical roller bearings with increased load capacity and clearance, are lubricated with a special grease for life.Power Supply:Voltages from 115 V to 690 V available in 50 HzDegree of protection:IP 54Thermal class:F (155 °C) according to DIN EN 60034-1Tropical insulation:StandardElectrical connection:Use high flexible cable for heavy mechanical stress.Example: H07RN-F or A07RN-F according to DIN VDE 0282.Permissible ambient temperature:-20 to +40 °COperating mode:Continuous operation (S1) and discontinuous operation at 100 % centrifugal force.Assembly:Without limitation, motors can be mounted in any position.Color coating:Standard RAL 6011. Other colors available on request.Type code:The type code is read as follows:First block number = working moment in kgcm(working moment = 2 x static moment)This is followed by a hyphen and then the pole number.Where: 4 = 1460 rpm 6 = 980 rpm (at 50 Hz mains frequency).Behind the second dash, the size is specified.