Produktname: HEIDENHAIN ERO 2080 Modular Angle Encoder With Optical Scanning
Marke: HEIDENHAIN
Produktcode: ERO 2080
Stichwörter: HEIDENHAIN
Modular Angle Encoder With Optical Scanning
Interessieren Sie sich für das Produkt HEIDENHAIN ERO 2080 Modular Angle Encoder With Optical Scanning vom Hersteller HEIDENHAIN mit dem Code ERO 2080? Kontaktieren Sie uns jetzt und holen Sie sich ein Angebot. Imtek Engineering, der schnellste und zuverlässigste Lieferant von Industrieausrüstung der Welt, wird Ihnen das beste Angebot machen!
Angebot per E-Mail erhalten: info@im-tek.com
Holen Sie sich jetzt ein Angebot für HEIDENHAIN ERO 2080 Modular Angle Encoder With Optical Scanning von unserem Live-Support-Team!
Scanning headAK ERO 2080Interface 1 VPPReference mark signalSquare-wave pulseCutoff frequency –3 dB1)? 1 MHzElectrical connection*15-pin D-sub connector (male) with 0.5 m/1 m/1.5 m/3 m cable12-pin SHR-12V-S connector (female) with 0.5 m/1 m/1.5 m/3 m cableCable outlet on the left or right and straight or angledCable lengthWith HEIDENHAIN cable: ? 20 m; during signal adjustment with the PWM 21: ? 3 mSupply voltageDC 5 V ±0.5 VCurrent consumption? 150 mA (without load)Vibration 55 Hz to 2000 HzShock 6 ms? 500 m/s2 (EN 60068-2-6)? 1000 m/s2 (EN 60068-2-27)Operating temperature–10 °C to 70 °CProtectionIP50Mass Scanning head Connector Cable? 5 g (without cable)? 71 g? 22 g/m* Please select when ordering1) Maximum frequency during referencing: 500 kHzCircular scaleTKN ERO 2000 (full circle)TKN ERO 20023) (segment)Measuring standardSUPRADUR graduation on glassMeasuring range360°45°Signal periods409625003)2500 over 360°Accuracy of graduation1)±8”±10'–Interpolation error2)±0.3”±0.5”±0.5”Position noise RMS (1 MHz)0.03”0.04”0.04”Reference marksOneOneOne on every sideHub inside diameter5 mm––Dimensions of graduation carrierØ 30 mmØ 18.6 mm18.6 mm x 9 mmCentering pin–3 mm3 mmMech. permissible shaft speed? 14 000 rpmMoment of inertia4.1 · 10–7 kgm22.2 · 10–8 kgm21.1 · 10–8 kgm2Protection EN 60529Complete, mounted encoder: IP00Mass? 5.2 g? 0.56 g? 0.36 g1) When centered with two scanning heads2) The position error within one signal period and the graduation accuracy together yield the encoder-specific error; for additional mounting and bearing errors of the measured shaft, see Measuring accuracy in the Modular Angle Encoders With Optical Scanning brochure3) Available as a prototype; orderable only after consultation