PERFORMANCE CHARACTERISTICSOutput: 3.33 mV/V +/- 2.0%Input Voltage: 10 Vdc recommended, 12 Vdc maximumCombined Error: +/- 0.25% FSO, (Including Linearity, Repeatability & Hysteresis) +/- 0.5% FSO for 500, 750, 1,000 psi rangesRepeatability: +/- 0.1%FSO, +/- 0.2% FSO for 500, 750, 1,000 psi rangesConfiguration: Four-arm bonded foil Wheatstone bridge strain gageBridge Resistance: Input: 345 Ohms minimum, Output: 350 Ohms +/- 10%Over Pressure: 2 X FSO or 35,000 psi whichever is lessZero Balance: +/- 5% FSOInternal Shunt Calibration (R-Cal): 80% FSO +/- 0.5%Insulation Resistance: 1000 megohms @ 50 VdcTEMPERATURE & MECHANICAL CHARACTERISTICSMax Diaphragm Temperature: 750oF (400oC)Zero Shift (due to temperature change): 15 psi/100oF Typical (27 psi/100oC)Electronics Operating Temperature: 250oF (121oC)Zero Shift Due to Temperature Change: +/- 0.01% FS/oF max (+/- 0.02% FS/oC max)Sensitivity Shift Due to Temperature Change: +/- 0.005% FS/oF max (+/- 0.01% FS/oC max)Mounting Torque: 500 inch/lbs. maximumStandard Wetted Parts: Dymax® coated 15-5 PH SST