EKF PCU-UPTEMPO CompactPCI PlusIO Mezzanine I/O Expansion Board

EKF

Product Code: EKF PCU-UPTEMPO CompactPCI PlusIO Mezzanine I/O Expansion Board
Artikelnummer: PCU-UPTEMPO
Brand: EKF



GET OFFER: info@imtek.com.tr

Description for EKF PCU-UPTEMPO CompactPCI PlusIO Mezzanine I/O Expansion Board

GeneralMixed function mezzanine side card for CompactPCI® PlusIO CPU boardsProvides additional front panel I/O, on-board M.2 based SATA SSD mass storage, and optional rear I/O capabilities across the J2 backplane connectorSuitable for use with the EKF PC6-TANGO low power CPU board8HP assembly together with CPU card12HP assembly in total with CPU card and C32-FIO mezzanineFront Panel I/ODual RS-232 connectors male DSUB-9 (COM port pin assignment, MAX3243 transceivers)Option dual USB 2.0 connectors, electronic power switches 1.5AOption single USB 2.0 connector and 2 x analog audio F/P jacks 3.5mm in/outOption C32-FIO mezzanine for additional front panel I/O (2 x RS-232, PS/2 KB/MS)Integrated 8HP front panel for CPU carrier card and PCU-UPTEMPOIntegrated 12HP front panel when C32-FIO 3rd floor mezzanine is installed in additionMass StorageDual M.2 sockets (formerly known as NGFF), B-coded, SATA 3.0 6G speed, classic AHCI protocol, suitable for installation of any popular operating systemLower on-board M.2 socket suitable for an SATA 6G based SSD M.2 module up to 22110 size, wired to the HSE mezzanine connector SATA port 1, derived directly from the PC6-TANGO carrier card Intel® APL-I SoC, Intel® driver supportUpper on-board M.2 socket suitable for an SATA 6G based SSD M.2 module up to 2280 size, wired to the HSE mezzanine connector SATA port 2, derived from the PC6-TANGO on-board Marvell® 9170 PCIe to SATA controller (may not be populated on all PC6-TANGO SKUs)On-Board FunctionsSIO (Super I/O Controller) SCH3114 attached to the LPC interface (4 x UART, PS/2, GPIO)HD-Audio Codec ALC262 (option)Rear I/O OptionRear I/O is optional - available on customers requestRear I/O connector J2 as defined by the CompactPCI® specificationLegacy interface rear I/O option KB/MS, up to 4 x UART, GPIOEnvironmental & RegulatoryDesigned & manufactured in GermanyISO 9001 certified quality managementLong term availabilityRugged solutionCoating, sealing, underfilling on requestCustom specific development available on requestRoHS compliantOperating Temperature: 0°C to +70°COperating temperature -40°C to +85°C (industrial temperature range) on requestStorage Temperature: -40°C to +85°C, max. Gradient 5°C/minHumidity 5% ... 95% RH non CondensingAltitude -300m ... +3000mShock 15g 0.33ms, 6g 6msVibration 1g 5-2000HzEC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)MTBF 75.5 years

Recommended Products For EKF