im-tek.com

Celem MT SERIES Matching Transformers

Celem

Product Code: MT SERIES
Brand: Celem



GET OFFER: info@imtek.com.tr

Description for Celem MT SERIES Matching Transformers

The MT series creatively addresses the key characteristics of high quality matching transformers for high frequency / high power applications. The skin effect in the MT is negligible due to its unique laminar structure. Instead of the traditional copper tubes, the MT winding is made of laminar copper sheets. At 350 kHz this revolutionary structure reduces resistive losses by a factor of 10, and consequently increases overall efficiency to above 90%. The coupling coefficient of the MT is exceptionally high. Using alternating primary and secondary layers of thin copper sheets creates unprecedented coupling and very low reactive losses. The MT was designed to achieve zero stray inductance. This advanced design results in short circuit voltage of less than 10%, so that over 90% of the available reactive power is transmitted to the load. The MT completely avoids de-rating of specification when tapped, through an innovative yet simple combination of identical coil elements that are connected in series and parallel. This enables the transformation ratio to be modified quickly and without power reduction. The frequency range of the MT is exceptionally wide: 5 – 350 kHz. This is made possible by practically eliminating stray inductance, as well as by using high saturation ferrite.Specifications TYPE MT 250 MT 300 MT 500 MT 1000 Dimensions (L x W x H) mm 287.5 x 228 x125 287.5 x 228 x170 287.5 x 228 x170 287.5 x 228 x 260 Weight kg 18 22 26 45 Tapping ratio 3:1 4:1 2:1 6:1 3:1 2:1 12:1 6:1 4:1 3:1 2:1 Max Primary voltage Vrms 600 800 1200 1200 Max secondary current A 1500 2000 3000 6000 Max primary current A 500 500 1000 500 1000 1500 500 1000 1500 2000 3000 Reactive power transfer % > 90% > 90% > 90% > 90% Active efficiency % > 95% > 95% > 95% > 95% Max power kVA 250 300 500 1000 Stray inductance ?H < 0.2 < 0.3 < 0.4 < 1.5 Frequency range kHz 20 - 350 20 - 350 20 - 350

Recommended Products For Celem


Celem CMPP Conduction Cooled Capacitor
Celem CSP 180 Conduction Cooled Capacitor
Celem C500T Conduction Cooled Capacitor
Celem C - CAP 02 Capacitor
Celem CSP 300 Conduction Cooled Capacitor
Celem CSM 150 Conduction Cooled Capacitor
Celem CSM 150/300 Conduction Cooled Capacitor
Celem QUAD 1000 Water-Cooled Capacitor
Celem CSP 1005/1500 Tunable Water-Cooled Capacitor
Celem CSP 180/300 Conduction Cooled Capacitor
Celem CSP 305B Conduction Cooled Capacitor
Celem CPRI 200 Ultra-High Frequency
Celem CSP 120/200 Conduction Cooled Capacitor
Celem C - CAP 04 Capacitor
Celem CSP 405A Conduction Cooled Capacitor
Celem CSM Nano Conduction Cooled Capacitor
Celem CSP 505 Water-Cooled Capacitor
Celem AS 150/5 Assembly System
Fisher 912 Series Pressure Reducing Regulators - LP-Gas
Servomech BG 86 MF H Bevel Gearbox
Mp Filter CU2102A10ANP01 Filter
Goulds 3420 Multistage/Double Suction
WENGLOR SS2-00VA000R3 Safety Through-Beam Sensor
Senseca HD2K-020GM025E-685 Flow Switch
Hengesbach PZM200 Flush-mounted pressure and level transmitter
NSD NCV-20NBPLP Converter
Vulcanic 3216-04 Screw Plug Immersion Heater
Vogel MKU5-14AB01000 428 Single Line Pump
Gestra TRG5-57
Sibre SHI 231 FC Safety Brake with Console
Böhmer BBF/FSL V Flanged Valve / Fully Welded
Max Air Be45-220M03 Switch
Gestra NRGT 26-2n Н=900mm Level Transmitter
Voith SR-N 120 Coupling
Megger MMG 10 Cable Sheath Tester
Parker DF40120QEVPKR241 Duplex Filter
Atlas Copco 1092901356 G37 Oil Cooler
KSB ETN 065-040-160 GCSCP1CGA Pump
Turbo TF085(N-V-T)P Header Tank with Threaded Stubs
Stauff MPK1/4-MET MINIPRESA 1/4 ISO228 CON CAPPUCCIO IN ME
Faulhaber 22EKV 7078:1 Planetary Gearhead
Böhmer BBS/BHG 008 350 Ball Valve