Nom du Produit: Aerzen Bulk Vehicle Positive Displacement Blower
Marque: Aerzen
Code Produit: Bulk Vehicle
Mots-clés: Aerzen
Aerzen Vehicle Displacement
Aerzen Vehicle Positive Displacement Blower
Aerzen Bulk Positive Displacement Blower
Bulk Positive Displacement Blower
Bulk Positive Blower
Bulk Positive Displacement
Aerzen Vehicle Displacement
Aerzen Bulk Positive
Aerzen Bulk Vehicle
Aerzen Positive Blower
Aerzen Vehicle Positive Blower
Vehicle Displacement
Aerzen Displacement Blower
Blower
Aerzen Bulk Blower
Aerzen Bulk Displacement Blower
Positive Displacement Blower
Vehicle Positive Blower
Displacement
Aerzen Bulk Vehicle
Positive Displacement Blower
Êtes-vous intéressé par le produit Aerzen Bulk Vehicle Positive Displacement Blower du fabricant Aerzen avec le code Bulk Vehicle? Contactez-nous maintenant et obtenez une offre. Imtek Engineering, le fournisseur d\'équipements industriels le plus rapide et le plus fiable au monde, vous offrira la meilleure offre!
Obtenez une offre par e-mail: info@im-tek.com
Obtenez une offre pour Aerzen Bulk Vehicle Positive Displacement Blower de notre équipe de support en direct maintenant!
Rotary lobe blowers for installation in tankers and silo trucksAerzen bulk vehicle blowers have been developed for installation in tankers and silo trucks with extended pressure differentials of up to 1.2 bar. Conveyance in two directions possible using either horizontal or vertical flow. Proven technology, oil-free. Design with 3-lobe rotorsCylinder with cast-in pre-inlet channels at discharge side to minimize the sound by pulsation reduction. Therefore only vertical installation position is possible. Speed range between 1450 up to 4800 1/min. Oil splash lubrication with oil sight glasses on both sides.Shaft sealings Conveying chamber by the carbon ring labyrinth seal proven over decades in connection with the neutral chambers open to the atmosphere. Driving shaft with radial seal ring. Direction of flow Vertical, from top to bottomDesign with two-lobe rotorsThe conveying chamber is completely separated from the oil sumps by a space open to atmosphere.The machine can be positioned upright, suspended from the top, and suspended from the left or right.They are also available with an integrated gearbox with a speed set-up ratio of i=2,1.The operating speed range is 1350 to 3200 1/min.The drive side is grease lubricated, while the gear side is splash oil lubricated.Gear driven models feature splash oil lubrication on both sides. Oil level check by means of dipstick.Shaft sealings The conveying chamber is sealed by means of four piston rings in combination with oil slingers adjacent to the vent space. The drive shaft is sealed by a seal ring. Gear driven models are sealed by a radial seal ring. Direction of flow Both directions possible in horizontal or vertcial flow. Drive Via direct coupling or narrow v-belt drive. Special materials None available. technICAL DATAType of technology Positive Displacement Blowers Volume flow 353.16 to 1,324.35 CFM Medium air Conveying oil-free Negative Pressure Max. -7.25 psi Positive Pressure Max. 18.13 psi